Amazon Black Friday Week deals

Paid link

How-to · Window Fans

How to Clean a Window Fan

Short answer

To clean a window fan, unplug it, lift it out of the window, and wipe the blades, grille and housing with a damp cloth. Use mild dish soap only if the manual allows it, then let every part dry before you put the fan back. Remove the screen or cover where the model lets you, and wipe it clean as well.

  1. Unplug the fan and lift it out

    Switch the fan off and pull the plug from the outlet before you touch the blades. Lift the fan out of the window and set it on a towel on a table or the floor, grille facing up. Keep the cord and plug dry and out of the way while you work. If the fan has accordion expanders or side panels, slide them in before you lift, so they do not catch on the frame.

  2. Wipe the blades and grille

    Wipe each blade front and back with a cloth dampened with water, turning the blade by hand to reach the far side. Wipe the grille from the front and the back, and wipe the housing and the window sill. Start with a damp cloth, add a small amount of mild dish soap to the cloth if the manual allows it, then wipe again with a cloth dampened with water only. Wring the cloth out well, so no water drips into the fan.

  3. Clean the screen and cover

    If your fan has a removable screen or fabric cover, lift it off and set it aside. Rinse the screen under running water, or wipe it with a damp cloth, and let it dry fully before it goes back on. Wash the fabric cover with water and mild dish soap if the manual allows it, then let it dry fully. A cover that still feels damp can hold dust, so give it time to air dry.

  4. Wipe the remote and controls

    If your fan has a remote control, wipe it with a dry, soft cloth, front and back, and wipe around the buttons. Wipe the buttons and the display on the fan itself with a dry cloth, and keep water off the display and the cord. Wipe the cord with a dry cloth as well, and check that the plug is dry before you plug the fan back in.

  5. Dry every part and put the fan back

    Let the blades, grille, screen and cover dry fully before you reassemble the fan. Set the fan back in the window and slide the expanders or side panels back out where the fan has them, and check that the fan sits level. Plug the fan in, switch it on, and check that air moves freely.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Window Fan, which compares them spec by spec.

FAQ

Can I use soap to clean a window fan?

Yes, mild dish soap is fine on a damp cloth if the manual allows it. Wipe with a damp cloth, add a small amount of soap for stuck dirt, then wipe again with a cloth dampened with water only. Let the fan dry before you plug it back in.

How do I clean a window fan without removing it from the window?

Unplug it, then wipe the blades and grille with a damp cloth while it sits in the window. Wipe the housing and sill as well. For a full clean, lift the fan out so you can reach the back and the screen.

Why does my window fan still look dusty after wiping?

Dust collects on the back of the blades and inside the grille, where a front wipe misses it. Lift the fan out, wipe each blade front and back, and wipe the grille from both sides. A dry cloth lifts loose dust before the damp wipe.

Can I rinse a window fan with water?

No. Wipe it with a damp cloth instead, and keep water out of the motor, controls and cord. Rinse only a removable screen or cover if the manual allows it, and let it dry fully before it goes back on.

More window fans how-tos