Amazon Black Friday Week deals

Paid link

How-to · Above Ground Pools

How to Clean an Above Ground Pool Filter

Short answer

To clean an above ground pool filter, switch the pump off, backwash a sand filter as the manual says, and rinse with water before you restart the pump. The Intex set here uses a sand filter, while the other sets list a filter pump without naming its type, so check your manual for the exact steps for your model.

  1. Know which filter you have

    The Intex set uses a sand filter pump, not a cartridge, and its sand lasts up to 5 years with regular backwashing. The SunSwell and Bestway sets list a filter pump without naming its type, so do not assume a cartridge is inside. Check the maker's manual for your model before you open anything, and follow the cleaning steps it gives for that filter type.

  2. Backwash the sand filter

    Switch the pump off before you touch the filter, then use the backwash setting the maker's manual gives for your pump. Backwashing is the cleaning step the manual gives for a sand filter. Run it as the manual says, then return the valve to the filter setting before you restart the pump.

  3. Drain and rinse the housing

    Switch the pump off before you rinse anything. The Bestway set has a flow control drain valve that removes water by attaching a garden hose when you are done swimming, and the SunSwell pump has a control valve to filter, drain and infuse water. Rinse with water only, and use a cleaner only if the maker's manual allows that cleaner. Never mix cleaners, and do not use bleach.

  4. Check seals and restart

    Check each connection before you restart the pump. The Bestway set uses a Seal and Lock system for pipe connections, and the SunSwell pump lists a leak-proof design, but a connection left loose will still leak. Set the valve to filter, switch the pump on, and watch for drips at each joint while the pump runs.

  5. When cleaning is not enough

    Cleaning will not fix sand that is worn out or a pump that has stopped working. When the sand reaches the end of its life, or the pump no longer filters after cleaning, contact the maker or a repair service for the next step.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Above Ground Pool, which compares them spec by spec.

FAQ

How often should I backwash a sand filter?

Follow the schedule in the maker's manual, and backwash when the manual says the filter needs it.

Can I use soap or chemicals to clean the filter?

Rinse with water, and use only a cleaner the maker's manual allows. Do not mix cleaners, and do not use bleach or pool chemicals.

Why is my pool filter not cleaning the water?

Check the valve setting first. The SunSwell pump has a control valve to filter, drain and infuse water, and a valve left on drain will not filter the pool. If the valve is set to filter, follow the maker's manual for the next step.

How long does filter sand last?

The Intex sand lasts up to 5 years with regular backwashing. Its 1,500 GPH sand filter pump uses sand instead of a cartridge.

More above ground pools how-tos