Amazon Black Friday Week deals

Paid link

How-to · Canister Vacuums

How to Clean a Canister Vacuum

Short answer

To clean a canister vacuum, unplug it, empty the dust bag or bin, clear the hose and tools, and clean the filter as the maker's manual says. Check the brush or floor tool for wrapped hair and string, wipe the canister body and wheels, and let every part dry before you put it back together.

  1. Empty the dust bag or bin

    Unplug the canister before you open it. Lift the lid or open the bag compartment and remove the full bag or bin, then empty the bin over a trash can and tap it until the dust falls out. Put in a fresh bag of the maker's own type when the old one is full, and close the compartment until it clicks into place.

  2. Clear the hose and tools

    Detach the hose from the canister and the wand, and look through it for a clog. Push out trapped dirt with a long, soft object that will not tear the hose, then run water through it only if the manual allows it and let it dry fully. Pull hair and string off the floor tool, crevice tool and upholstery tool, and clear the small openings on each one.

  3. Clean or replace the filter

    Take the filter out as the manual shows and tap it over a trash can to knock the dust loose. Rinse it only if the manual says it is washable, and let it dry fully before it goes back in. When the filter still looks grey or the vacuum pulls less dirt after cleaning, fit a new filter of the maker's own type.

  4. Wipe the canister and wheels

    Wipe the outside of the canister, the lid and the handle with a damp cloth and a little mild dish soap if the manual allows it, then dry each part. Turn the canister over and pull hair and string from around the wheels so they turn freely. Put the hose, wand and tools back on, and check that each part sits in place before the next use.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Quiet Canister Vacuum, which compares them spec by spec.

FAQ

Can I wash a canister vacuum filter with water?

Only if the maker's manual says the filter is washable. If it is, let it dry completely before you put it back. If it is not, tap it clean and fit a new filter of the maker's own type.

How do I know the hose is clogged?

The vacuum pulls less dirt and the hose feels blocked when you look through it. Detach the hose, clear the clog, and check the floor tool openings before you put it back.

What do I do with a full dust bag?

Remove the full bag from the compartment and put it in the trash, then fit a fresh bag of the maker's own type. Close the compartment until it clicks into place.

More canister vacuums how-tos