Amazon Black Friday Week deals

Paid link

How-to · Canister Vacuums

How to Use Vacuum Attachments

Short answer

To use vacuum attachments, push the attachment onto the end of the wand or hose until it fits, then pick the tool that matches the surface. A floor tool covers open floors, a crevice tool reaches narrow gaps, an upholstery tool cleans soft furniture, and a dusting tool cleans shelves and blinds. Remove the tool and store it on the wand mount when you finish.

  1. Fit the attachment to the wand

    Switch the vacuum off and unplug it before you change a tool. Pull the old tool off the end of the wand or hose and push the new tool on until it sits firm. On the Soniclean, the tools sit on the tool storage wand mount when they are not in use. If a tool feels loose, pull it off and push it on again until it fits.

  2. Use the floor tool on open floors

    Start with the floor tool on open floors. The Soniclean Technik floor tool and the Sanitaire 11-inch combination carpet and bare floor tool both cover carpet and hard floors. Push the tool in slow, straight lines and overlap each pass a little so no strip is missed. Lift the tool at the end of each pass and set it down again for the next one. When the floor is done, switch to a smaller tool for the edges.

  3. Reach gaps with the crevice tool

    Fit the crevice tool when you clean narrow gaps, such as the space between sofa cushions, the edge where the floor meets the wall, and the corners of stairs. Push the flat end into the gap and pull it back slowly so dirt in the gap is drawn out. Move the tool along the whole gap before you move on. The Soniclean and the Sanitaire both include a crevice tool, and the Sanitaire also includes an upholstery tool for soft furniture.

  4. Clean furniture and dust with the small tools

    Use the upholstery tool on chairs, sofas, and cushions, and the dusting tool on shelves, lampshades, and blinds. Hold the tool flat against the surface and move it in short passes. On the Soniclean, the digital motor control dial lets you change the suction for the surface you clean, so turn it down for light fabrics and up for firm cushions. Put each tool back on the wand mount when you finish.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Quiet Canister Vacuum, which compares them spec by spec.

FAQ

Do vacuum attachments fit any vacuum?

No. Attachments fit the wand or hose of the vacuum they were made for, so check the fit before you buy a new tool.

Which attachment do I use on stairs?

Use the crevice tool for the corners and edges of each step, then the upholstery tool for the tread if it is carpeted. The Soniclean and the Sanitaire both include a crevice tool and an upholstery tool for this work.

Can I wash vacuum attachments?

Check the maker's manual for your vacuum before you wash any tool. Some tools rinse with water, while others only wipe clean with a dry cloth. Let a washed tool dry fully before you fit it back on the wand.

More canister vacuums how-tos