Amazon Black Friday Week deals

Paid link

How-to · Carpet Cleaners

How to Clean Carpet With a Carpet Cleaner

Short answer

Start by clearing the room and vacuuming loose dirt from the carpet, then fill the clean water tank and add the maker's cleaning formula as the manual says. Run the carpet cleaner in slow, overlapping passes, then empty the dirty water tank and rinse the tanks and tools before you store the machine.

  1. Clear the room and vacuum first

    Move small furniture and items off the carpet so the cleaner can reach the whole area. Vacuum the carpet to pick up loose dirt and pet hair before you use the carpet cleaner. Check the carpet for small objects that could catch in the brush roll. This first pass keeps loose dirt out of the tanks and lets the cleaner work on the dirt that stays in the fibers.

  2. Fill the clean water tank

    Lift out the clean water tank and fill it with water up to the line the maker marks. Add the maker's cleaning formula in the amount the manual gives, and do not mix in other cleaners. On the Kenmore, the clean tank holds 3.2 L and the dirty tank holds 1.4 L, so the two tanks stay separate. On the Uwant, the 2-in-1 tank holds clean water and waste water in one unit. Fit the tank back until it sits in place.

  3. Clean in slow overlapping passes

    Plug in the cleaner and start at the far side of the room so you work back toward the door. Push the cleaner forward slowly and pull it back over the same path so the brush and suction cover each strip twice. Overlap each pass a little so no strip of carpet is missed. Work in sections and empty the dirty water tank when it reaches the fill line, then keep going.

  4. Empty the tanks and clean the tools

    Unplug the cleaner before you open it or touch the tanks. Empty the dirty water tank and rinse it with water. On the BISSELL, use the 4-inch self-cleanout tool to rinse the tool with one touch, and on the Kenmore, lift the removable cover to reach under the brush rolls. Leave the tanks and tools to dry before you put them back and store the cleaner.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Floor Carpet Cleaner, which compares them spec by spec.

FAQ

Do I vacuum before I use a carpet cleaner?

Yes. Vacuuming first picks up loose dirt and pet hair so the carpet cleaner works on the dirt that stays in the fibers. It also keeps loose dirt out of the tanks.

What cleaning formula should I use in the machine?

Use the maker's own cleaning formula in the amount the manual gives. The Kenmore comes with a trial size bottle of cleaning formula. Do not mix in other cleaners.

How do I reach stairs or tight spots with the cleaner?

Use the hose and hand tools that come with the cleaner. The BISSELL comes with a 7 ft hose, a 4-inch self-cleanout tool and a spraying crevice tool for spots the upright cannot reach.

More carpet cleaners how-tos