How-to · Carpet Cleaners
What Is a Carpet Extractor With Heater
A carpet extractor with a heater is a carpet cleaner that warms the water it sprays onto the carpet before suction pulls it back out. Warm water helps loosen dirt in the carpet fibers, and the machine then lifts the dirty water into its dirty-water tank. The heater is built into the machine, so you fill it with water and let it warm the water as you clean.
What the heater does
The heater warms the water in the clean-water tank as the machine runs, so the water that reaches the carpet is warm rather than cold from the tap. Warm water helps lift dried spills and ground-in dirt that cold water leaves behind. The machine sprays the warm water, the brushes work it into the fibers, and the suction draws the dirty water back into the dirty-water tank.
Fill the clean-water tank
Lift out the clean-water tank and fill it with water, adding the maker's own cleaning formula only if the manual allows it. Put the tank back until it clicks into place, then plug the machine in and switch it on. Give the heater a moment to warm the water before you start, and follow the steps in the maker's manual for your model.
Clean in slow passes
Work in slow, overlapping passes, spraying water on the forward pass and pulling the dirty water out on the pass back. Let the suction lift as much water as it can before you move on, so the carpet is left damp rather than soaked. Empty the dirty-water tank when it fills, and keep going until the water you pull out runs clear.
Empty and rinse the tanks
Unplug the machine before you clean it. Empty the dirty-water tank into a toilet or drain, then rinse both tanks with water and let them dry before they go back in the machine. Wipe the brushes and the nozzle with a damp cloth, and store the machine with the tanks empty, following the maker's manual for your model.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
BISSELL TurboClean PET
An upright carpet cleaner with a 3.79 L water tank, a 7 ft hose, a 4-inch self-cleanout tool and a 4-row brush for pet messes.
View on Amazon -
Kenmore Pet Portable Carpet Cleaner Machine
A portable carpet cleaner with a 3.2 L clean tank, a 1.4 L dirty tank, dual powered brush rolls and a 25 ft power cord.
View on Amazon -
Uwant 18Kpa Carpet Cleaner Machine with Pet
A portable carpet cleaner with 18Kpa suction, a 2-in-1 water tank and a 1-year warranty.
View on Amazon
These come from our ranked list Best Floor Carpet Cleaner, which compares them spec by spec.
FAQ
Do all carpet extractors have a heater?
No. Some carpet cleaners spray water at tap temperature, while a heated extractor warms the water as it works. Check the maker's description for a heater before you buy, since the feature is not on every model.
Can I use hot water from the tap instead?
Only if the maker's manual says so. Some machines are built for cold tap water and warm it with their own heater. Fill with water at the temperature the manual states.
How do I keep the machine working well?
Empty the dirty-water tank after each use and rinse both tanks with water. Clear hair and dirt from the brushes and nozzle, and let the tanks dry before you store the machine. Follow the schedule in the maker's manual for filters and parts.



