How-to · Carpet Cleaners
How to Use a Carpet Steam Cleaner
To use a carpet steam cleaner, vacuum the carpet, fill the tank with water and the maker's own cleaning formula, and push the cleaner in slow, overlapping passes. Treat stains with the hand tool, empty the dirty tank when it fills, and let the carpet dry before you walk on it.
Vacuum the carpet
Vacuum the whole carpet before you start, so loose dirt and hair do not turn to mud in the tank water. Move small furniture out of the way and pick up toys, cords and anything else on the floor. Check the maker's manual for the settings to use on your carpet type.
Fill the water tank
Fill the water tank with water and the maker's own cleaning formula, as the manual says. Do not mix cleaners, and use only a formula made for the machine. Set the tank back in place and check that it sits flat before you switch the cleaner on.
Treat stains, then make slow passes
Spray the maker's formula on stains and let it sit while you work the rest of the carpet. Push the cleaner in slow, overlapping passes, pulling it back over each strip so the brushes and suction reach the dirt. Work from the far side of the room toward the door, so you do not walk on carpet you just cleaned.
Empty the dirty tank and rinse
Empty the dirty tank when it fills, so dirty water does not go back on the carpet. Pour the dirty water out, rinse the tank with water, and put it back. Wipe the brush area and the tools with a damp cloth, and unplug the cleaner before you clean it.
Let the carpet dry
Leave the room alone until the carpet feels dry to the touch. Do not move furniture back or walk on the carpet while it is still damp. Open windows or run a fan to move air through the room while the carpet dries.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
BISSELL TurboClean PET
Its 3.79 L water tank and 4-row DeepReach PowerBrush suit full-room carpet care, and the 7 ft hose with a 4-inch self-cleanout tool reaches upholstery.
View on Amazon -
Kenmore Pet Portable Carpet Cleaner Machine
Its 3.2 L tank and 1.4 L dirty tank keep fresh water and dirty water apart, and its 25 ft cord and dual powered brush rolls cover rugs and upholstery.
View on Amazon -
Uwant 18Kpa Carpet Cleaner Machine with Pet
Its 2.4 L 2-in-1 water tank keeps the waste tank and the wash tank together, and its 3 brush heads and Pet Pro solution handle spots on rugs and couches.
View on Amazon
These come from our ranked list Best Floor Carpet Cleaner, which compares them spec by spec.
FAQ
Do I need to vacuum before steam cleaning?
Yes. Vacuuming picks up loose dirt and hair, so the steam cleaner works on the dirt left in the carpet fibers.
What goes in the water tank?
Water and the maker's own cleaning formula, as the manual says. Do not mix cleaners, and use only a formula made for the machine.
How do I know the carpet is dry?
Wait until the carpet feels dry to the touch before you walk on it or move furniture back. Leave the room alone while it dries.
Can I use a carpet cleaner on upholstery?
Yes, with the hand tool and only on fabrics the manual allows. The BISSELL TurboClean PET and the Kenmore cleaner both list upholstery use, so check the manual for your model.




