Amazon Black Friday Week deals

Paid link

How-to · Carpet Cleaners

How to Deep Clean Carpet with a Carpet Cleaner

Short answer

To clean carpet with a carpet cleaner, vacuum the carpet first, fill the clean water tank with water and the maker's cleaner, then work the machine across the carpet in slow, overlapping passes. Empty the dirty water tank when it fills, refill the clean water tank as needed, and let the carpet dry before you walk on it or put furniture back.

  1. Vacuum and clear the carpet

    Move furniture off the carpet or to one side so you can reach each area. Vacuum the whole carpet to lift loose dirt, hair and crumbs from the surface and from the fibres. Pick up small items, cords and loose objects that could catch in the brush roll. A clear, vacuumed carpet lets the carpet cleaner reach the dirt below the surface instead of pushing loose debris around.

  2. Fill the clean water tank

    Fill the clean water tank with water and the maker's own cleaner, following the amounts in the maker's manual. Do not mix cleaners, and do not add bleach. Fit the tank back into the machine and check that it sits in place. Keep the maker's cleaner bottle and the manual nearby so you can refill the tank the same way when it runs low.

  3. Work the machine across the carpet

    Start at the far side of the room and work toward the door so you do not walk on the damp carpet. Push the machine forward slowly, then pull it back over the same path to lift the dirty water into the tank. Overlap one pass with the one before it so no strip is missed. Work one area at a time, and stop to empty the dirty water tank when it fills.

  4. Treat spots with the hand tools

    Use the hose and hand tools on stains and spots. Spray the maker's cleaner on the spot if the manual allows it, scrub it with the tool, then suction the dirty water away. Repeat the spray, scrub and suction steps on a stubborn spot until the water the tool lifts looks clear. Rinse the tool after use so cleaner does not dry inside it.

  5. Empty the tanks and dry the carpet

    Empty the dirty water tank into a toilet or sink and rinse it with water. Rinse the clean water tank and leave the tanks open so they dry before storage. Wipe the brush roll and the outside of the machine, and unplug the machine before you clean it. Let the carpet dry fully before you move furniture back, and keep the room aired while it dries.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Floor Carpet Cleaner, which compares them spec by spec.

FAQ

How do I get the carpet to dry after cleaning?

Leave the room aired and keep people and furniture off the carpet until it feels dry to the touch. Empty the dirty water tank first so the machine is ready if a damp area needs another pass.

Can I use my own cleaner in a carpet cleaner?

Use the maker's own cleaner and follow the amounts in the maker's manual. Do not mix cleaners, and do not add bleach. If the manual allows it, water alone can be used for a light pass.

Why is the dirty water tank filling so fast?

A tank fills fast when the carpet holds a lot of dirt or water from earlier passes. Empty it, rinse it, and fit it back before you carry on. Check the tank often so you stop before it overflows.

More carpet cleaners how-tos