Amazon Black Friday Week deals

Paid link

How-to · Carpet Cleaners

How to Remove Dog Urine From Carpet

Short answer

To remove dog urine from carpet with a carpet cleaner, blot up what you can with a towel, then run the carpet cleaner over the spot with water and the maker's own cleaning solution, following the manual. Work from the outside of the spot toward the middle, then let the carpet dry fully before you walk on it. Repeat the pass if the mark or the smell stays.

  1. Blot up the wet spot first

    Press a dry towel onto the spot and lift it, then press a dry part of the towel down again. Keep blotting until the towel comes away dry. Do not rub the spot, since rubbing pushes the wetness deeper into the carpet fibers. Blotting first keeps the cleaner from spreading the wetness across a wider patch.

  2. Fill the cleaner and run it over the spot

    Fill the clean tank with water and the maker's own cleaning solution, as the manual says. Run the cleaner over the spot in slow passes, starting at the outside edge and working toward the middle so the wetness stays inside the patch. Follow the manual for how to move the machine and how to lay down the solution.

  3. Lift the dirty water out

    Make slow suction passes over the spot until the machine pulls up no more dirty water. Empty the dirty tank when the manual says to, and refill the clean tank if the spot needs another pass. If the mark stays after the carpet dries, run the cleaner over the spot again with fresh solution.

  4. Let the carpet dry fully

    Let the carpet dry fully before you walk on it, and keep pets off it while it dries. Look at the carpet when it is dry, and check by smell. If the mark or the smell stays, repeat the cleaning pass. Empty the dirty tank and rinse the tanks after the job, as the manual says.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Floor Carpet Cleaner, which compares them spec by spec.

FAQ

Can I use dish soap in a carpet cleaner?

Use the maker's own cleaning solution in the machine, as the manual says. Do not mix cleaners, and do not put bleach in the tank.

How do I know the spot is gone?

Look at the carpet when it dries, and check by smell. If the mark or the smell stays, run the cleaner over the spot again with fresh solution, as the manual says.

Should I clean the whole carpet or just the spot?

Clean the spot first, then run the cleaner over the carpet around it so the cleaned patch blends with the rest. Empty the dirty tank and rinse the tanks after, as the manual says.

More carpet cleaners how-tos