Amazon Black Friday Week deals

Paid link

How-to · Carpet Cleaners

How to Clean Carpet with Steam

Short answer

To clean carpet with steam, vacuum the carpet first, fill the machine with water and the maker's cleaner if the manual allows it, then work across the carpet in slow passes. Let the carpet dry before you walk on it, and empty the dirty water tank when you finish. The steps below walk through each part in order.

  1. Check the manual first

    Read the manual for your machine and for your carpet before you start. The manual says which carpets the machine is made for and which cleaner, if any, goes in the tank. If the manual says not to use steam on your carpet, follow it and do not steam that carpet.

  2. Vacuum the carpet first

    Vacuum the carpet before you steam it, so loose dirt and hair are gone before the steam loosens what is left. Go over the carpet in more than one direction, and pay attention to the edges and corners where dirt gathers. Empty the vacuum when you finish so it is ready for next time.

  3. Fill the tank

    Fill the clean water tank with water, and add the maker's own cleaner only if the manual allows it. Do not mix cleaners, and do not add bleach. Put the tank back in the machine and check that it sits in place before you switch the machine on.

  4. Work across the carpet in passes

    Start at the far side of the room and work toward the door, so you do not walk over carpet you have just cleaned. Move the machine in slow, even passes and overlap each pass a little, so no strip of carpet is missed. Go over a marked spot again with a second pass rather than holding the machine still in one place.

  5. Let the carpet dry

    Leave the room open to the air and let the carpet dry before you walk on it or put furniture back. The carpet is ready when it feels dry to the touch and no damp marks show where you step. Empty the dirty water tank when you finish, and clean the machine as the manual says.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Floor Carpet Cleaner, which compares them spec by spec.

FAQ

Can I use a steam mop on any carpet?

No. Check the manual for your carpet and for your machine first. Some carpets and some machines are not made for steam, and the manual is the guide to follow.

Do I need to vacuum before I steam the carpet?

Yes. Vacuuming first takes away loose dirt and hair, so the steam works on what is left in the carpet. Steam alone does not take the place of vacuuming.

What goes in the tank of a steam cleaner?

Water, and the maker's own cleaner only if the manual allows it. Never mix cleaners and never add bleach.

More carpet cleaners how-tos