How-to · Dehumidifiers
How Quickly a Dehumidifier Works
A dehumidifier starts pulling moisture from the air as soon as it runs, and you can tell it is working when water collects in the tank and the humidity reading falls. How fast a room feels drier depends on the room size, the starting humidity and the unit's pints-per-day figure, so match the coverage figure to your room and let the unit run until the reading holds steady.
What the pints figure means
Pints per day is the amount of moisture a dehumidifier removes in a day, so a higher figure means more moisture removed in the same time. The Waykar and the KNKA each remove 34 pints per day, the DREO removes 75 pints per day, and the Midea lists 20 pints per day and 30 pints (2012 DOE). The two Midea figures come from different test standards, so compare pints figures only when they use the same standard.
Match coverage to the room
Coverage is the maker's own figure for the floor area a unit is rated for, so compare it with the size of your room. The Waykar is rated for up to 2,000 sq ft by the maker, the Midea for up to 1,500 sq ft, the KNKA for up to 2,500 sq ft and the DREO for up to 4,500 sq ft. A unit rated for a larger area than your room has more capacity to spare, while a unit rated for a smaller area than your room will take longer to bring the reading down.
Set the target and close the room
Set a target humidity on the unit and let it run until the reading holds at that level. The Waykar controls humidity from 30% to 80%, the Midea from 35% to 85%, and the KNKA from 30% to 80% in its SETTING mode, with AUTO mode set to 50% RH. Keep doors and windows closed while the unit runs, so damp air from outside does not undo its work. The Waykar and the KNKA each have a 24-hour timer, and the DREO has a timer for scheduling runs.
Watch the tank and the reading
The first sign a dehumidifier is working is water collecting in the tank, and the second is the humidity reading on the unit falling. Empty the tank when it is full, or fit the included drain hose for continuous drainage so the unit keeps running without stops to empty it. The Waykar, DREO and KNKA shut off when the tank is full, and each of the four comes with a drain hose. Clean the washable filter as the manual says.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Waykar 34 Pints 2000 Sq. Ft.
A 34-pint dehumidifier rated for up to 2,000 sq ft by the maker, with 30%-80% humidity control, a 24-hour timer and a 0.66-gallon tank.
View on Amazon -
Midea Cube 20 Pint Dehumidifier for Basement
A 20-pint dehumidifier rated for up to 1,500 sq ft by the maker, with a 12 L tank, Wi-Fi app control and a drain hose.
View on Amazon -
DREO Energy Star 2025 Smart Dehumidifier
A 75-pint dehumidifier rated for up to 4,500 sq ft by the maker, with a 7 L tank, 3 fan speeds and a 41 dB rating.
View on Amazon -
KNKA 2500 Ft² Max 34 Pints Dehumidifier
A 34-pint dehumidifier rated for up to 2,500 sq ft by the maker, with a 3 L tank, a 37 dB rating and a 24-hour timer.
View on Amazon
These come from our ranked list Best Dehumidifier, which compares them spec by spec.
FAQ
How do I know my dehumidifier is working?
Water should collect in the tank, and the humidity reading on the unit should fall over time. If the tank stays empty, check that doors and windows are closed, the filter is clean and the drain hose is fitted as the manual shows.
Can I leave a dehumidifier running all day?
Yes. Set a target humidity and let the unit cycle on and off to hold it, and fit the drain hose so the tank never fills and stops the run. Empty the tank when it is full if you run it without the hose.
Why is my room still damp after running it?
The unit may be rated for a smaller area than the room, so compare the maker's coverage figure with the room size. Doors or windows left open let damp air back in, and a full tank stops the unit until you empty it.




