Amazon Black Friday Week deals

Paid link

How-to · Dehumidifiers

How to Set Up a Dehumidifier to Drain

Short answer

To set up a dehumidifier to drain, connect the included drain hose to the drain outlet on the unit and run it downhill to a floor drain, so water flows out on its own and the tank never needs emptying. Keep the hose straight, with no kinks and no loops that rise above the unit. Check the maker's manual for your model before you start.

  1. Pick a drain spot and check the hose

    Place the unit near a floor drain, a laundry sink or another spot where water can run out on its own. Check that the drain hose that came with your model reaches the drain without stretching, and that the hose end sits below the drain outlet on the unit so water runs downhill. Read the maker's manual for the drain connection on your model, and hire a licensed plumber where the manual says so.

  2. Attach the drain hose to the unit

    Find the drain outlet on the back or side of the unit and remove the cap or plug that covers it, if your model has one. Push the hose onto the outlet until it sits snug, and check the joint for drips after the unit runs. Keep the hose in one steady downhill run with no kinks, sharp bends or loops that climb back up, since a loop can hold water and stop the flow.

  3. Set the mode and check the first run

    Switch the unit on and pick continuous mode or the drain setting your model offers, so water goes to the hose instead of the tank. Let the unit run and watch the hose end to confirm water is coming out, then look at the joints and the floor around the unit for drips. If no water comes out, check that the hose runs downhill and that no kink or loop is blocking it.

  4. Keep the hose clear and the filter clean

    Check the hose from time to time for kinks, cracks or a loose joint, and straighten it out when you move the unit. Empty the tank when you take the hose off, and follow the schedule in the maker's manual for cleaning the filter. When the tank fills and the unit stops, check the hose first: a kink or a loop that rose above the unit can stop the flow.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Dehumidifier with Drain, which compares them spec by spec.

FAQ

Can I use a garden hose instead of the drain hose?

Use the drain hose that came with your model, since it is sized for the drain outlet. If you need a longer run, check the maker's manual for your model to see what hose it takes.

Why is my dehumidifier still filling its tank?

The hose may have a kink or a loop that rises above the unit, or the hose may not be pushed fully onto the outlet. Check the whole hose run, refit the joint, and make sure the hose end sits below the drain outlet.

Does the drain hose need to run downhill?

Yes. Water leaves through the hose by gravity, so the hose end must sit below the drain outlet on the unit. A hose that runs uphill or loops back up can hold water and stop the flow.

More dehumidifiers how-tos