Amazon Black Friday Week deals

Paid link

How-to · Dehumidifiers

How to Use a Dehumidifier for the First Time

Short answer

Set the dehumidifier upright, plug it in, set a target humidity, and empty the tank or connect the drain hose. Place it where air moves around it, close the doors and windows, and let it run until the tank fills or the room reaches the level you set. Check the tank, the filter, and the drain hose each time you use it.

  1. Let it stand upright first

    Keep the dehumidifier upright from delivery to first use. The KNKA asks for 24 hours upright after delivery before you switch it on. Set the unit on a flat floor where air can move around it, and leave space at the inlet and the outlet. Do not lay the unit on its side.

  2. Empty the tank or fit the drain hose

    Open the tank bay, slide the tank out, and pour the water away. The Waykar tank holds 0.66 gallons, the Midea tank holds 12 liters, the DREO tank holds 7 liters, and the KNKA tank holds 3 liters. For longer runs, connect the drain hose the maker includes and lead it to a floor drain or a sink, as the maker's manual shows. The Waykar, DREO, and KNKA stop and alert you when the tank is full, so check the tank before each run.

  3. Set the humidity level and fan speed

    Pick a target humidity on the panel or in the app, then pick a fan speed. The Waykar and the KNKA offer a 30%–80% range, while the Midea adjusts from 35% to 85%. The KNKA AUTO mode holds 50% humidity until you change it, and its DRY mode suits drying clothes. The Waykar and the KNKA run on 2 fan speeds, and the DREO runs on 3. Watch the display or the app and change the setting when the room feels damp again.

  4. Set the timer and let it run

    On the Waykar and the KNKA, use the 24-hour timer to set when the unit runs, and the DREO has a timer too. The Midea runs from its SmartHome app through the cloud instead. Close the doors and windows while the unit runs, as the KNKA maker suggests, so damp air stays out. The KNKA holds the level you set by switching on when humidity is high and off when it is low.

  5. Clean the filter and the tank

    Unplug the unit before you clean it. Wash the filter as the maker's manual says: the Waykar, Midea, DREO, and KNKA each have a washable filter. Empty the tank and rinse it with water, and wipe the outside with a soft cloth. A tank that smells or a filter that looks grey is a sign to clean both. Follow the schedule in the maker's manual for filter care.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Dehumidifier, which compares them spec by spec.

FAQ

Do I need to empty the water tank by hand?

Not always. Each of these four models includes a drain hose for continuous drainage, so you can connect it and skip the tank. If you use the tank, empty it when it fills.

How do I set the humidity level the first time?

Pick a target on the panel or in the app and let the unit hold it. The Waykar and the KNKA offer a 30%–80% range, the Midea adjusts from 35% to 85%, and the KNKA AUTO mode holds 50% humidity. Close the doors and windows while it runs.

Can I control the dehumidifier from my phone?

The Midea and the DREO have phone app control. The Waykar and the KNKA set humidity and time from their own controls.

More dehumidifiers how-tos