Amazon Black Friday Week deals

Paid link

How-to · Espresso Machines

How to Froth Milk With an Espresso Machine

Short answer

To make foamy milk with an espresso machine, pour milk into a jug, place the steam wand tip just under the surface and open the steam until the milk grows and turns glossy. The Ninja machine froths milk with a dual froth system and presets for steamed milk, thin froth, thick froth and cold foam. Tap the jug to pop large bubbles, then pour the milk into the espresso.

  1. Pour the milk into the jug

    Pour milk into a frothing jug, leaving room for it to grow as foam forms. The Ninja machine comes with a milk jug, so use the jug that came with your machine. Pour in less than you think you need, since frothed milk takes up more room than flat milk.

  2. Purge the steam wand first

    Before the wand goes into the milk, run a short burst of steam into an empty cup. That clears water that sits in the wand after the machine heats up, so the water does not thin the milk. Wipe the wand with a damp cloth after purging, so dried milk never builds up on it.

  3. Froth with the steam wand

    Place the wand tip just under the surface of the milk and open the steam. Keep the tip near the surface while the milk grows, so air folds in and the foam forms. As the milk rises, lower the jug a little to keep the tip in the milk, and close the steam when the jug feels warm to the touch. On the CASABREWS machine, do not brew coffee right after frothing milk. Let the machine cool down first, or it goes into over-heating protection mode.

  4. Use the hands-free frothing on the Ninja

    The Ninja machine froths milk with its dual froth system. The system pairs a spinning whisk with an automatic steamer, and its presets cover steamed milk, thin froth, thick froth and cold foam. Pour the milk into the jug, pick a preset and let the machine run, or switch to manual frothing to control the foam yourself.

  5. Tap, swirl and pour

    Once the steam is off, tap the jug on the counter to pop large bubbles, then swirl the jug until the milk looks glossy and smooth. Pour the milk into the espresso in a slow, steady stream, and lift the jug as the cup fills so the foam sits on top. Drink it right away, while the foam still holds its shape.

  6. Clean the wand after each use

    Wipe the steam wand with a damp cloth as soon as you finish frothing, before milk dries on it. Run a short burst of steam into an empty cup to clear milk from inside the wand. If the wand still looks dirty, wipe it again with a damp cloth and follow the cleaning steps in the maker's manual.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Espresso Machine, which compares them spec by spec.

FAQ

Can I froth milk without a steam wand?

Yes, if the machine froths milk another way. The Ninja machine uses a dual froth system with a spinning whisk and an automatic steamer, and its presets cover steamed milk, thin froth, thick froth and cold foam.

Why is my frothed milk full of large bubbles?

Large bubbles form when the wand tip sits too far above the milk, or when the milk is not mixed after frothing. Keep the tip just under the surface, then tap the jug on the counter and swirl it before pouring.

Do I need to clean the steam wand after frothing?

Yes. Wipe the wand with a damp cloth right after frothing, then run a short burst of steam to clear milk from inside the wand.

Can I make cold foam with an espresso machine?

Yes, if the machine offers it. The Ninja machine has a cold foam preset in its dual froth system, and its presets also cover steamed milk, thin froth and thick froth.

More espresso machines how-tos