Amazon Black Friday Week deals

Paid link

How-to · Espresso Machines

How to Use an Espresso Machine Milk Steamer

Short answer

To use the milk steamer on an espresso machine, fill a jug with cold milk, place the steam wand tip just below the milk surface, and open the steam. Keep the tip near the surface while the milk spins and rises, then close the steam, tap the jug, and swirl the milk until it looks smooth and glossy. Pour it into your espresso right away.

  1. Prepare the machine and milk

    Fill the water tank and switch the machine on. Let it heat until the ready light or gauge shows it is ready to brew. Pour cold milk into the jug, leaving room at the top so the milk has space to rise as it froths. Use the jug that came with the machine if one is included. Cold milk from the fridge gives the steam more time to work before the milk warms through.

  2. Purge the steam wand

    Open the steam for a few seconds with the wand over the drip tray or a cup before you steam milk. This clears water that sits in the wand after the last use. Wipe the wand with a damp cloth after purging so dried milk does not bake on. A wand with water left in it can spit and thin the milk, so this step is worth doing each time you steam.

  3. Steam the milk

    Lower the wand tip just below the surface of the milk and open the steam fully. Keep the tip near the surface while the milk spins in a whirlpool and rises in the jug. As the milk warms, lower the jug slightly so the tip stays near the surface. Listen for a soft hissing sound and watch the milk turn smooth and glossy. Close the steam before the jug feels too hot to hold.

  4. Finish and clean the wand

    Tap the jug on the counter once or twice to pop large bubbles, then swirl the milk until the surface looks smooth. Pour the milk into your espresso in a slow, steady stream. Wipe the steam wand with a damp cloth right away, then open the steam briefly over the drip tray to clear milk from inside the wand. Rinse the jug with water and mild dish soap if the manual allows it.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Espresso Machine, which compares them spec by spec.

FAQ

How much milk should I put in the jug?

Leave room at the top of the jug so the milk has space to rise as it froths. A jug filled to the top leaves no room for the milk to expand and can spill over.

Why is my steamed milk full of large bubbles?

Large bubbles come from holding the wand tip too deep or too high in the milk. Keep the tip just below the surface so the milk spins, then tap the jug and swirl the milk to smooth it out.

Can I brew espresso right after steaming milk?

Not always. On some machines the boiler must cool down first, or the machine can go into over-heating protection and the cup lights flash. Follow the steps in the included guide to cool it down before you brew.

More espresso machines how-tos