How-to · Evaporative Coolers
Evaporative Cooler Pad Types
Evaporative cooler pads come in three main types: aspen wood fiber, cellulose honeycomb, and synthetic. Aspen pads are loose wood shavings held in a frame, cellulose pads are rigid honeycomb sheets, and synthetic pads are made from plastic fibers. Each type holds water so air passing through it cools by evaporation, and the right choice depends on your cooler model and how you use it.
Aspen wood fiber pads
Aspen pads are made from thin wood shavings packed into a frame that fits inside the cooler. Water runs over the shavings and air passes through them, cooling as the water evaporates. These pads fit smaller coolers and are easy to lift out and swap. They sag and thin out as they wear, so check them when you open the cooler and replace them with the type and size your maker's manual calls for.
Cellulose honeycomb pads
Cellulose pads are rigid sheets of treated paper folded into a honeycomb shape. The folds give water a large surface to spread across as air moves through the pad. These pads hold their shape when wet and suit larger coolers, including models with pads on more than one side. The Uthfy cooler uses 3-side high-density cooling pads, which put pads on three sides of the unit.
Synthetic pads
Synthetic pads are made from plastic fibers or foam-like material formed into a sheet or mat. They hold their shape, resist tearing when you handle them, and can be rinsed with water and put back in the cooler. Some synthetic pads are washable, so check the maker's manual before you rinse one. They suit coolers where pads are removed and cleaned often.
Match the pad to your cooler
Pads are not one size fits all, so start with the maker's manual for your cooler model. The manual names the pad type and size that fit, and using the wrong size leaves gaps where air passes through dry. The SereneLife cooler has an auto-dry pad system, which dries the pad after use.
Keep pads working well
Rinse pads with water when they look grey or dusty, and let them dry fully before the cooler runs again. A pad that stays damp between uses can smell, so run the fan without water or follow the drying steps in the maker's manual. Replace a pad that stays matted, torn or thin after cleaning, and keep the water tank clean so dirt does not reach the pads.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
TABU Portable Tower Fan
An evaporative cooler and tower fan that cools by water evaporation, with 3 speeds, a 24-hour timer, a remote and 4 ice packs included.
View on Amazon -
Uthfy 41" Swamp Cooler
Its 3-side high-density cooling pads give the air more evaporative surface, and its 10.6-gallon tank holds water for continuous operation through the night.
View on Amazon -
SereneLife Portable Swamp Cooler Air Conditioner
It has an auto-dry pad system and a washable filter, plus 2,500 CFM of airflow and an 8-gallon water tank.
View on Amazon
These come from our ranked list Best Home Swamp Cooler, which compares them spec by spec.
FAQ
How do I know which pad fits my cooler?
Check the maker's manual for the pad type and size for your model.
Can I rinse a cooler pad with water?
Some pads can be rinsed with water, so check the maker's manual first. Let the pad dry fully before you put it back, and replace it if it stays matted or torn after cleaning.
Why does my cooler blow warm air?
Dry pads, a low water level or worn pads are the first things to check. Fill the tank, let the pads soak, and replace pads that stay thin or matted.





