Amazon Black Friday Week deals

Paid link

How-to · Evaporative Coolers

How to Clean the Water Pump in an Air Cooler

Short answer

To clean the water pump in an air cooler, unplug the cooler, drain the water tank, lift out the pump, and rinse it and the tank with fresh water. Wipe away grit and buildup with a soft cloth, using mild dish soap or white vinegar only if the manual allows it. Put the pump back, refill the tank, and run the cooler to check the water flow.

  1. Unplug the cooler and drain the tank

    Switch the cooler off and unplug it from the outlet before you touch the water or the pump. Move the cooler to a spot where spilled water can drain away, such as a patio or a bathtub. Open the drain plug or tip the tank to empty the water, then lift the tank off if your model lets you remove it. Empty the tank fully so grit and loose buildup come out with the water.

  2. Lift out the pump

    Find the pump at the bottom of the tank, where the water line or hose connects to it. Note how the pump sits and which way the hose points before you move it, so you can put it back the same way. Lift the pump out gently and set it on a towel. If a clip or a small cover holds it in place, release it as the manual shows and keep the parts together.

  3. Rinse the pump and the tank

    Rinse the pump under fresh water and wipe its outside with a soft cloth to remove grit and buildup from the intake and the casing. Rinse the tank the same way and wipe the inside walls, then rinse again until the water runs clear. Use mild dish soap or white vinegar only if the manual allows it, and rinse well after. Never open the pump housing or touch parts inside it; contact the maker or a repair service for faults inside the pump.

  4. Put the pump back and check the flow

    Set the pump back in the tank the way it sat before, with the hose pointing the same way, and refit any clip or cover you removed. Fill the tank with fresh water and plug the cooler back in. Switch the cooler on and watch the water flow through the pads. If the flow is weak or the pump makes an odd sound, switch it off and check that the pump sits right and the intake is clear.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Home Swamp Cooler, which compares them spec by spec.

FAQ

How do I know the pump needs cleaning?

Weak water flow, odd sounds from the pump, or a tank that smells are signs to check. Unplug the cooler, lift out the pump, and look for grit or buildup on the intake.

Can I use vinegar to clean the pump?

Only if the maker's manual allows it. Rinse the pump with fresh water first, use white vinegar as the manual directs, then rinse well so no vinegar stays in the tank.

Do I need to remove the pump to clean it?

Yes, lift it out of the tank so you can rinse the intake and casing and wipe away buildup. Note how it sits and which way the hose points before you move it.

More evaporative coolers how-tos