How-to · Evaporative Coolers
How to Fill an Evaporative Cooler
To fill an evaporative cooler, switch it off, open the fill point on the tank, and add water until the level reaches the fill line or the level the maker marks. Close the fill point before you switch the cooler back on. On models with a hose connection, you can connect a garden hose instead and let the tank refill on its own.
Switch the cooler off first
Unplug the cooler or switch it off before you open the tank. Keep the power off until the fill point is closed again. Place the cooler where you plan to run it before you fill it, since a full tank is heavy to move. Read the maker's manual for where the fill point sits on your model, and check the tank is seated in place before you start adding water.
Add water through the fill point
Open the fill point and pour water in slowly so you can watch the level rise. Stop at the fill line or the level the maker marks, and do not keep pouring past it. On a model with a top fill opening, pour from above. Wipe up spills around the base before you switch the cooler on.
Add ice packs for colder air
If your cooler came with ice packs, freeze them first and place them in the tank as the maker's manual shows. Ice packs cool the water the pads draw from, which cools the air the cooler blows out. Replace melted packs with fresh frozen ones when the air no longer feels cool enough. Do not add loose ice straight into the tank unless the manual says you can.
Use the hose fill on models that have one
Some coolers let you connect a garden hose so the tank refills on its own. Connect the hose to the fill fitting as the manual shows, turn the water on, and check the connection for drips. Turn the hose off and disconnect it when you move the cooler or when you stop using it for the season. Follow the maker's manual for the fitting and adapter that came with your model.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
TABU Portable Tower Fan
It comes with 4 reusable ice packs that enhance cooling, and it has 3 speeds, a 24-hour timer and a remote control.
View on Amazon -
Uthfy 41" Swamp Cooler
Its 10.6-gallon tank holds water for long runs, and it offers top fill or a garden hose connection with an included adapter for automatic refilling.
View on Amazon -
SereneLife Portable Swamp Cooler Air Conditioner
Its 8-gallon tank and dual ice packs support cooler air, and it has a remote, a 12-hour timer and WiFi control.
View on Amazon
These come from our ranked list Best Home Swamp Cooler, which compares them spec by spec.
FAQ
How much water does an evaporative cooler need?
Fill to the fill line or the level the maker marks, and do not pour past it. The tank size sets how long the water lasts, so check the level when the air no longer feels cool.
Can I use ice instead of water in my cooler?
No, the cooler needs water in the tank for the pads to draw from. Ice packs are the way to chill that water, and they go in the tank as the manual shows.
How do I know when to refill the tank?
Check the water level at the fill opening and refill when it drops near the bottom. Air that no longer feels cool is a sign the water is low.





