Amazon Black Friday Week deals

Paid link

How-to · Furnace Filters

How an Air Filter Goes Into an AC

Short answer

An AC filter slides into the filter slot or return grille with the airflow arrow pointing toward the furnace or blower, away from the return grille. Match the size printed on your current filter frame, then push the new filter in until it sits flat in the slot. The arrow shows the direction air moves through the system, so check it before you push the filter in.

  1. Find the filter slot

    Switch the system off at the thermostat, then look for the filter slot at the return grille or beside the furnace or air handler. The slot sits where air enters the system, and the old filter frame shows the size you need, such as 16x25x1. Note the size printed on the frame before you buy a replacement, and check the arrow on the old filter so you can see which way it pointed.

  2. Check the size and the arrow

    Hold the new filter next to the old one and compare the size printed on both frames, including the smaller actual size printed beside the nominal size. A filter sold as 16x25x1 carries a smaller actual size on its frame, so compare the printed figures rather than the nominal size alone. Find the airflow arrow printed on the frame edge and keep it pointing toward the furnace or blower.

  3. Slide the filter into place

    Hold the filter by its frame and slide it into the slot with the arrow pointing toward the furnace or blower, away from the return grille. Push it in until it sits flat and fills the slot, with no gap at the edges for air to pass around it. If the filter stops partway, pull it out, check that the size matches the slot, and try again with the arrow still pointing the same way.

  4. Close up and check the fit

    Put the grille cover or slot cover back and switch the system on at the thermostat. Listen and feel for air moving through the vents as it did before, and check that the cover sits flat with no rattling. If the filter will not sit flat or the cover will not close, take the filter out and check the size and the arrow direction again.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best 16x25x1 Hvac Filter, which compares them spec by spec.

FAQ

Which way does the airflow arrow point?

Toward the furnace or blower, away from the return grille. The arrow follows the direction air moves through the system, so a filter with the arrow pointing the other way sits backward in the slot.

What size filter does my AC need?

The size printed on your current filter frame, such as 16x25x1. Measure the frame or read the printed size, and match the nominal size when you buy a replacement.

How do I know when to change the filter?

Look at the filter when you check it: a filter that looks grey and clogged with dust needs changing. Follow the schedule in the maker's manual, and change it sooner when it looks dirty.

More furnace filters how-tos