How-to · Garment Steamers
Do You Touch the Fabric With a Garment Steamer?
No, you do not press the steamer head against the fabric. Hold the head a short distance from the garment and let the steam pass through the fibers, moving the head slowly from top to bottom. Some steamers add a heated soleplate or a flat-iron mode that does touch the fabric, and those models work like a small iron when you use that setting.
Hold the head off the fabric
Keep the steam head just off the surface of the garment and let the steam reach the fibers. Move the head slowly from the top of the garment toward the bottom, and hold the hem or edge with your other hand so the fabric stays flat. Pressing the head hard against the cloth can leave wet marks and does not remove wrinkles faster. If the fabric still shows a crease, pass over it again instead of pressing harder.
Use the steam setting for the fabric
Match the steam level to the fabric in front of you. Delicate silk and chiffon need a light pass, while cotton and linen take more steam. If you are unsure how a fabric will react, test on an inside seam or an old garment first and check the result before you steam the rest. The maker's manual lists the fabrics each model is made for, so check it before you start.
When the head does touch the fabric
Some steamers add a heated soleplate or a flat-iron mode that is meant to touch the fabric. Use that mode only on fabrics the manual lists for it, and keep the head moving so it does not sit on one spot.
Fix wet spots and stubborn wrinkles
If the fabric comes out damp, hold the head a little farther from the cloth and move it slowly so the steam has room to spread. When the steam weakens, empty the tank and refill it, and keep the water below the maximum fill line. For mineral buildup, descale with white vinegar and water only if the manual allows it, and follow the maker's own steps.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
HiLIFE Steamer for Clothes
Its 240ml tank gives up to 15 minutes of continuous steam, and the included brush fits onto the steam head.
View on Amazon -
Conair Steamer for Clothes & Upholstery
Its heated soleplate and built-in creaser press collars and cuffs, and it comes with 3 attachments including a bristle brush and a delicate fabric spacer.
View on Amazon -
OGHom Steamer for Clothes
It heats up in 30 seconds, its 180ml tank gives about 10 minutes of continuous steam, and its aluminum heating plate works across silk, cotton, linen and wool.
View on Amazon -
YOZLNFO Travel Steamer for Clothes Handheld
Its handle turns 90 degrees to switch between flat ironing and hanging steam, and it has a 7-hole ceramic soleplate and 5 fabric modes.
View on Amazon
These come from our ranked list Best Clothes Steamer, which compares them spec by spec.
FAQ
Can I press a steamer against silk?
No. Hold the head off the fabric and use a light pass, or fit the delicate fabric spacer that comes with the Conair model. Test on an inside seam first.
Why is my steamer leaving wet spots?
The head may be too close to the fabric, or the tank may be overfilled. Hold the head farther back, keep the water below the maximum fill line, and move the head slowly.
Do I need an ironing board with a steamer?
No. Steamers work on hanging garments, and models with a flat-iron mode press collars and cuffs without a board.





