Amazon Black Friday Week deals

Paid link

How-to · Pool Heaters & Heat Pumps

How Above Ground Pool Heaters Work

Short answer

An above ground pool heater is an air-source heat pump: it pulls heat from the air outside and moves it into the pool water. The pool pump pushes water through the heater's heat exchanger, the water picks up heat, and it flows back into the pool until the thermostat reaches the set temperature. The same unit can also cool the water when the pool gets too warm.

  1. How the heat moves

    These heaters are air-source heat pumps. A compressor moves heat from the outside air into a heat exchanger, and the pool pump pushes pool water through it. The water picks up heat as it passes through, then flows back into the pool, and the cycle repeats until the water reaches the temperature set on the thermostat. The Vidapool, MICOE and Varpoolfaye use a titanium heat exchanger, and the AQUASTRONG holds its set temperature within 2°F.

  2. What the BTU and COP figures mean

    BTU is the heat output the maker gives: 16,000 BTU for the Vidapool, Varpoolfaye and AQUASTRONG, and 18,000 BTU for the MICOE. COP is the efficiency figure the maker gives: 5.5 for the Vidapool and AQUASTRONG, 4.88 for the MICOE and 4.3 for the Varpoolfaye. A higher COP means the unit moves more heat for each unit of electricity it uses. Compare the gallons figure too: 5,000 gallons for the Vidapool and AQUASTRONG, and 5,500 gallons for the MICOE and Varpoolfaye.

  3. Setting it up

    These units plug in and connect to the pool pump lines. The Vidapool and AQUASTRONG come with 1.25-inch and 1.5-inch hose adapters, and the Varpoolfaye comes with two universal connectors and a 118-inch power cord. The Vidapool asks for a minimum flow rate of 450 GPH from the pool pump, and the Varpoolfaye asks for 700 GPH. Follow the maker's installation manual, and hire a licensed electrician where the manual says so.

  4. Keeping the heat in

    A pool cover helps hold the warmth in the water, and the Vidapool and Varpoolfaye suggest one for heating efficiency. Water dripping from the bottom of the Varpoolfaye is normal condensation from the heat exchange and defrost cycles. The AQUASTRONG has an auto-defrost system that clears ice buildup without manual work. Set the temperature on the panel or the app, and let the thermostat hold it.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Above Ground Pool Heater, which compares them spec by spec.

FAQ

Does a pool heat pump need a gas line?

No. These units run on electricity and pull heat from the surrounding air. They plug in: the Vidapool comes with a 16.5 ft GFCI plug, and the Varpoolfaye comes with a 118-inch power cord.

How do I pick the right size heater?

Compare the maker's BTU output and the gallons it lists: the MICOE and Varpoolfaye list 18,000 and 16,000 BTU for up to 5,500 gallons, while the Vidapool and AQUASTRONG list 16,000 BTU for up to 5,000 gallons. Check the gallons of your pool against those figures.

Can the heater cool the pool too?

Yes. The Vidapool, MICOE, Varpoolfaye and AQUASTRONG all have heating and cooling modes. The Vidapool cools from 46 to 82°F, and the AQUASTRONG cools from 41 to 83°F.

More pool heaters & heat pumps how-tos