How-to · Pool Heaters & Heat Pumps
How to Service a Pool Heater
To service a pool heater, switch it off and unplug it, clear leaves and debris from around the unit, clean the cabinet and air intake, check the pool filter and water flow, and look at the control panel or app for alerts. Follow the schedule in the maker's manual, and contact the maker or a repair service for any work inside the unit.
Switch off power before you start
Switch the heater off at its control panel and unplug it before you touch the unit. If the heater is wired to a breaker, follow the maker's manual for shutting it down and hire a licensed electrician where the manual says so. Do not open the cabinet or reach inside the unit.
Clear debris and clean the cabinet
Clear leaves, dirt and anything stored against the unit so air can move around it. Wipe the outside of the cabinet with a damp cloth and mild dish soap if the manual allows it, and rinse with clean water. Keep the air intake and the top of the unit clear so the fan can draw air in.
Check the filter and water flow
Check the pool filter and the pump strainer basket for leaves and debris, and clean them as the pool manual says. A dirty filter can slow the water moving through the heater, so clear it before you switch the heater back on. If the water flow stays low after cleaning, follow the maker's manual or contact the maker.
Check the panel and app for alerts
Switch the heater back on and look at the control panel or the phone app for alerts, error codes or a temperature that does not match the setting. Note what the display shows and follow the steps in the maker's manual for that alert. If the alert keeps coming back, contact the maker or a repair service.
Watch for leaks and call for internal work
Look under the unit for water. A small amount can be condensation from heat exchange and defrosting, so check whether it stops once the unit has run for a while. If water keeps leaking, or if the heater needs work inside the cabinet, contact the maker or a repair service instead of opening it.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
MICOE 75,000 BTU Pool Heat Pump
A 75,000 BTU heat pump for pools up to 21,000 gallons, with app control, a titanium heat exchanger and auto-defrost.
View on Amazon -
Varpoolfaye 30,000 BTU Electric Above Ground Pool
A 30,000 BTU heat pump for pools up to 7,000 gallons, with WiFi app control, a titanium heat exchanger and a 126 inch power cord.
View on Amazon -
AQUASTRONG Swimming Pool Heater for Above Ground
A 16,000 BTU heat pump for pools up to 5,000 gallons, with auto-defrost, 1.25 inch hose adapters and a 3-year warranty.
View on Amazon -
Oibath 35,000 BTU Full Inverter Pool Heat
A 35,000 BTU full inverter heat pump with WiFi and Bluetooth app control, a top air discharge and a titanium heat exchanger.
View on Amazon
These come from our ranked list Best Pool Heater, which compares them spec by spec.
FAQ
How often should I service my pool heater?
Follow the schedule in the maker's manual, and service it when you see signs it needs attention, such as debris around the unit, a dirty filter, an alert on the panel or app, or water leaking from the cabinet.
Can I open my pool heater to fix it myself?
No. Do not open the cabinet or work on the parts inside the unit, such as the compressor or the control board. Contact the maker or a repair service for that work.
Why is there water under my pool heater?
A small amount can be condensation from heat exchange and defrosting. If the water keeps coming or the puddle grows, switch the heater off, unplug it and contact the maker.


