Sump Pumps
Best 110v Sump Pump (2026): 3 Models Side by Side
As an Amazon Associate I earn from qualifying purchases. Specs below come from each product's Amazon listing; we do not test products in person.
The WAYNE CDU1000 is the pick for a sump pit: a 1 HP motor moving up to 6,100 GPH, a vertical float switch that fits narrow pits, and a 5-year warranty. The two grinder pumps are rated at 6,600 GPH, and suit sewage and effluent duty.
Starting out? See the main guide: Best Sump Pump
Top picks at a glance
-
Best OverallWAYNE CDU1000 1 HP Submersible Sump Pump9.8 View on Amazon -
9.2 View on Amazon -
Also GreatBurnvale 1.5 HP Sewage Grinder Pump9.2 View on Amazon
Compare the specs
Ranked on motor size, max flow, max lift / head from each listing, plus how many buyers have rated it. A dash (—) means we could not confirm that figure from the listing.
| Pick | Motor size | Max flow | Max lift / head | Stainless steel | Weight | Warranty |
|---|---|---|---|---|---|---|
| 1. WAYNE CDU1000 1 HP Submersible Sump Pump | 1 HP | 6,100 GPH | — | Yes | 19 lb | 5-year |
| 2. Schupethauer 1.5 HP Sewage Grinder Pump | 1.5 HP | 6,600 GPH | 42 ft | Yes | — | — |
| 3. Burnvale 1.5 HP Sewage Grinder Pump | 1.5 HP | 6,600 GPH | 45 ft | Yes | 37.92 lb | — |
WAYNE CDU1000 1 HP Submersible Sump Pump
A 1 HP motor at up to 6,100 GPH, a vertical float switch for narrow pits, cast iron and stainless steel, and a 5-year warranty.
- Motor size: 1 HP
- Max flow: 6,100 GPH
- Stainless steel
- 5-year warranty stated
Good for
- Owners of a sump pit who want automatic operation
- Buyers who want a 5-year warranty and USA assembly
Skip it if
- You need more than 6,100 GPH of flow
- You need a pump lighter than 19 lb
It has a 1 HP motor, a stainless steel motor housing and a cast iron volute, and pumps up to 6,100 GPH. The integrated vertical float switch fits narrow sump pits and runs the pump on and off on its own. The 1-1/2 inch NPT discharge meets standard building codes, and the pump is assembled in the USA with a 5-year warranty.
Schupethauer 1.5 HP Sewage Grinder Pump
A 1.5 HP grinder pump at up to 6,600 GPH with a 42 ft lift, a 2-inch discharge, and thermal overload protection.
- Motor size: 1.5 HP
- Max flow: 6,600 GPH
- Max lift / head: 42 ft
- Stainless steel
Good for
- Owners of a basement sewage system who need grinder duty
- Buyers who want a 30 ft power cord and thermal overload protection
Skip it if
- You need a lift past 42 ft
- You need flow past 6,600 GPH
It has a 1.5 HP motor, a stainless steel housing and a cast iron base, and moves up to 6,600 GPH with a lift of up to 42 ft. The adjustable float switch turns the pump on at high water and off at low water, and the 30 ft power cord gives flexible installation. The 2-inch NPT discharge passes solids up to 2 inches, and thermal overload protection shuts the pump off if the motor overheats.
Burnvale 1.5 HP Sewage Grinder Pump
A 1.5 HP grinder pump at up to 6,600 GPH with a 45 ft head, a 2-inch discharge, and dual auto and manual operation.
- Motor size: 1.5 HP
- Max flow: 6,600 GPH
- Max lift / head: 45 ft
- Stainless steel
Good for
- Owners of a sump basin who want dual auto and manual operation
- Buyers who want a 45 ft head and a 30 ft cord
Skip it if
- You need a lift past 45 ft
- You need a pump lighter than 37.92 lb
It has a 1.5 HP motor with a stainless steel cutting blade that shreds wipes, small branches, cable ties and soft and semi-hard debris. It moves up to 6,600 GPH with a 45 ft maximum head, and the 2-inch discharge handles solids up to 2 inches. The adjustable float switch runs in auto or manual mode, the 30 ft cord allows long-distance installation, and thermal overload protection shuts the pump down if the motor overheats.
How to choose
Flow and lift
Flow in GPH says how much water the pump moves, and lift in feet says how high it can push that water. The WAYNE moves up to 6,100 GPH, while the Schupethauer and Burnvale move up to 6,600 GPH. The Schupethauer lifts up to 42 ft and the Burnvale up to 45 ft, so check the height from the pit to the discharge point and match it against the lift figure.
Grinder pumps and solids
A grinder pump suits sewage and effluent, where the water carries solids. The Schupethauer and Burnvale have a 2-inch discharge that passes solids up to 2 inches, and the Burnvale adds a stainless steel cutting blade. The WAYNE is a sump pump for groundwater, rain and snow melt, with a top suction design that reduces air lock and clogging from debris.
Float switches and cords
All three pumps switch on and off with a float switch, so the pump runs only when the water rises. The WAYNE uses an integrated vertical float switch that fits narrow pits, while the Schupethauer and Burnvale use an adjustable mechanical float switch. The two grinder pumps come with a 30 ft power cord, and both list a built-in carrying handle for moving the pump.
FAQ
What does GPH mean on a sump pump?
GPH is gallons per hour, the amount of water the pump moves. The WAYNE moves up to 6,100 GPH, and the Schupethauer and Burnvale move up to 6,600 GPH.
What is the difference between the two grinder pumps?
Both are 1.5 HP grinder pumps rated at 6,600 GPH with a 2-inch discharge. The Schupethauer lifts up to 42 ft, and the Burnvale lifts up to 45 ft and adds a stainless steel cutting blade and dual auto and manual operation.
Do these sump pumps need a special outlet?
The Schupethauer and Burnvale run on 110V and come with a 30 ft grounded power cord. Plug the pump straight into a grounded outlet and never lift it by the power cord.
How do I pick between the WAYNE and a grinder pump?
Pick the WAYNE for a sump pit with groundwater, rain and snow melt. Pick a grinder pump for sewage and effluent, where the water carries solids up to 2 inches.



