Sump Pumps
Best Stainless Sump Pump (2026): 3 Models Side by Side
As an Amazon Associate I earn from qualifying purchases. Specs below come from each product's Amazon listing; we do not test products in person.
For the best stainless sump pump, the WAYNE CDU1000ET leads as the Best Overall pick: a 1 HP stainless steel pump moving up to 6,100 GPH, with a float switch tested to run over 2 million cycles and a 5-year warranty. The Green Expert brings a 1.5 HP motor moving up to 6,000 GPH, and the Zoeller M98, the runner-up, moves up to 4,320 GPH with a cast iron housing.
Starting out? See the main guide: Best Sump Pump
Top picks at a glance
-
Best OverallWAYNE 1 HP Sump Pump Cast Iron9.8 View on Amazon -
Runner-UpZoeller M98 Flow-Mate Sump Pump9.2 View on Amazon -
Also GreatGreen Expert 1.5HP Submersible Sump Pump9.2 View on Amazon
Compare the specs
Ranked on motor size, max flow from each listing, plus how many buyers have rated it. A dash (—) means we could not confirm that figure from the listing.
| Pick | Motor size | Max flow | Stainless steel | Weight | Warranty |
|---|---|---|---|---|---|
| 1. WAYNE 1 HP Sump Pump Cast Iron | 1 HP | 6,100 GPH | Yes | — | 5-year |
| 2. Zoeller M98 Flow-Mate Sump Pump | — | 4,320 GPH | Yes | 31.09 lb | — |
| 3. Green Expert 1.5HP Submersible Sump Pump | 1.5 HP | 6,000 GPH | Yes | — | — |
WAYNE 1 HP Sump Pump Cast Iron
A 1 HP stainless steel pump moving up to 6,100 GPH, with a float switch tested to run over 2 million cycles and a 5-year warranty.
- Motor size: 1 HP
- Max flow: 6,100 GPH, the highest here
- Stainless steel
- 5-year warranty stated
Good for
- Basement owners who want 6,100 GPH and a 5-year warranty
- Owners of 11-inch or larger sump basins
Skip it if
- You need more than 6,100 GPH of flow
- Your sump basin is under 11 inches across
It has a stainless steel motor housing with a cast-iron volute and a top suction design that eliminates air lock and minimizes clogging from debris in the sump pit. The 1-1/2 in. NPT discharge fits building code, and the pump installs in about 15 minutes with no need to drill a weep hole. It is assembled in the USA and carries a 5-year warranty.
Zoeller M98 Flow-Mate Sump Pump
A 1/2 HP cast iron pump moving up to 4,320 GPH, with a vortex impeller, a 9 foot cord and an LED power plug.
- Max flow: 4,320 GPH
- Stainless steel
Good for
- Basement owners who want a cast iron pump with an LED plug
- Buyers who want a 9 foot cord and a float guard
Skip it if
- You need more than 4,320 GPH of flow
- You want a cord longer than 9 feet
It has an oil-filled motor with a cast iron housing, a non-clogging vortex impeller made from corrosion-resistant plastic, and stainless steel hardware, a float guard and a switch arm. The built-in snap action float switch runs the pump automatically, and the 9 foot cord has an LED plug that shows power at a glance. It weighs 31.09 lb and carries a warranty of 12 months from installation or 18 months from manufacture, whichever comes first.
Green Expert 1.5HP Submersible Sump Pump
A 1.5 HP full stainless steel pump moving up to 6,000 GPH, with a 25 ft cord and a tethered float switch.
- Motor size: 1.5 HP
- Max flow: 6,000 GPH
- Stainless steel
Good for
- Basement owners who want 6,000 GPH and a 25 ft cord
- Owners who need to move solids up to 1-1/2 inches
Skip it if
- You need more than 6,000 GPH at zero feet
- Your sump pit stays shallower than 18 inches
It has a 1.5 HP copper wiring motor and a full 304 stainless steel housing and pump base, with thermal overload protection for continuous duty use. It handles water up to 1-1/2 inch solids and moves 85 gallons per minute at 10 ft of discharge lift. Adapter kits fit 1 in., 1-1/4 in., 1-1/2 in. and 2 in. ID discharge hoses, and a carrying handle and 25 ft grounded power cord are included.
How to choose
Compare flow in gallons per hour
Flow is the first number to compare. The WAYNE moves up to 6,100 GPH, the Green Expert up to 6,000 GPH at zero feet, and the Zoeller up to 4,320 GPH. The Green Expert also lists 85 gallons per minute at 10 ft of discharge lift. Match the flow figure to the water your basement takes in during heavy rain or snowmelt, and check the lift from the pit to the discharge point.
Check the float switch and basin fit
A sump pump starts and stops on its float switch, so the switch type and the basin size decide whether it fits. The WAYNE uses a float switch with a 9 in. ON level and a 4 in. OFF level, and fits basins 11 in. in diameter or larger. The Green Expert uses a tethered float switch that starts at 18 inches and shuts off at 7 inches, so it needs deeper water in the pit than a pump that starts lower. The Zoeller uses a built-in snap action float switch with a float guard. Measure the basin before ordering.
Stainless steel, cords and warranty
All three pumps in this guide use stainless steel: the WAYNE has a stainless steel motor housing with a cast-iron volute, the Zoeller has stainless steel hardware, and the Green Expert has a full 304 stainless steel housing and pump base. Cord length differs: the Green Expert cord runs 25 ft, and the Zoeller cord runs 9 feet. The WAYNE carries a 5-year warranty, and the Zoeller warranty runs 12 months from installation or 18 months from manufacture, whichever comes first. The Green Expert has thermal overload protection for continuous duty use.
FAQ
What flow rate do these sump pumps move?
The WAYNE moves up to 6,100 GPH, the Green Expert up to 6,000 GPH at zero feet, and the Zoeller up to 4,320 GPH.
At what water depth do the WAYNE and Green Expert pumps start?
The WAYNE float turns on at 9 inches and off at 4 inches. The Green Expert float starts at 18 inches and shuts off at 7 inches.
Do these pumps handle solids in the sump pit?
The Green Expert handles solids up to 1-1/2 inches. The Zoeller vortex impeller passes solids, and the WAYNE top suction design minimizes clogging from debris.
Which pump here carries the longest warranty?
The WAYNE, with a 5-year warranty. The Zoeller warranty runs 12 months from installation or 18 months from manufacture, whichever comes first.




