Sump Pumps
Best Heavy Duty Sump Pump (2026): Top 4 by the Specs
As an Amazon Associate I earn from qualifying purchases. Specs below come from each product's Amazon listing; we do not test products in person.
The Acquaer 3/4 HP pump leads this list at 6,400 GPH with a 29 ft lift, a tethered float switch and a 2-year warranty. For more flow, the FOTING 1.5 HP pump moves up to 9,000 GPH with the same 29 ft lift. The WAYNE pump weighs 12 lb and carries a 5-year warranty.
Starting out? See the main guide: Best Sump Pump
Top picks at a glance
-
Best OverallAcquaer 3/4 HP Submersible Sewage Pump9.8 View on Amazon -
9.6 View on Amazon -
9.4 View on Amazon -
9.2 View on Amazon
Compare the specs
Ranked on motor size, max flow, max lift / head from each listing, plus how many buyers have rated it. A dash (—) means we could not confirm that figure from the listing.
| Pick | Motor size | Max flow | Max lift / head | Stainless steel | Weight | Warranty |
|---|---|---|---|---|---|---|
| 1. Acquaer 3/4 HP Submersible Sewage Pump | — | 6,400 GPH | 29 ft | — | — | 2-year |
| 2. FOTING 1.5HP 9000GPH Sump Pump Submersible Sewage/Effluent | 1.5 HP | — | 29 ft | — | 34.17 lb | 3-year |
| 3. WAYNE CDU980E 3/4 HP Submersible Sump Pump | — | 5,490 GPH | — | Yes | 12 lb | 5-year |
| 4. LANCHEZ 1HP 6600 GPH Submersible Sewage Pump | 1 HP | 6,600 GPH | 27 ft | — | 29.12 lb | 3-year |
Acquaer 3/4 HP Submersible Sewage Pump
It pairs 6,400 GPH with a 29 ft lift, a tethered float switch and a 2-year warranty in a cast iron body.
- Max flow: 6,400 GPH
- Max lift / head: 29 ft
- 2-year warranty stated
Good for
- Basement owners who need a sewage and dewatering pump
- Buyers who want automatic on and off by water level
Skip it if
- You need to lift water past 29 ft
- You need a pump for a septic tank
It has a 3/4 HP oil-filled split capacitor motor and a reinforced vortex impeller that passes 2-inch solids through a 2-inch NPT discharge. The adjustable float switch turns the pump on and off with the water level, and the 10-foot cord has a piggy-back plug for automatic operation. Built-in thermal overload protection shuts the pump off during dry running, and the pump carries a 2-year warranty.
FOTING 1.5HP 9000GPH Sump Pump Submersible Sewage/Effluent
Its 1.5 HP motor moves up to 9,000 GPH and lifts water 29 ft, with a tethered float switch and a 3-year service term.
- Motor size: 1.5 HP
- Max lift / head: 29 ft
- 3-year warranty stated
Good for
- Owners who need 9,000 GPH of flow
- Buyers who want a 3-year after-sale service term
Skip it if
- You need to lift water past 29 ft
- You need to carry the pump up stairs, since it weighs 34.17 lb
It has a 1.5 HP PSC motor, a cast iron casing and a reinforced vortex impeller that handles solids up to 2 inches through a 2-inch NPT discharge. The adjustable tethered float switch turns the pump on and off with the water level, and the float length adjusts with a cable lock. Built-in thermal overload protection stops motor burnout during dry runs, and an air venting valve prevents air lock.
WAYNE CDU980E 3/4 HP Submersible Sump Pump
Its 3/4 HP motor moves up to 5,490 GPH, and its vertical float switch fits narrow sump pits.
- Max flow: 5,490 GPH
- Stainless steel
- 5-year warranty stated
Good for
- Owners of narrow sump pits who want automatic operation
- Buyers who want a 5-year warranty
Skip it if
- You need more than 5,490 GPH of flow
- You need more than 3/4 HP of motor
It has a 3/4 HP motor in cast iron and stainless steel, with a top suction design that helps prevent clogging and removes the need for a weep hole. The integrated vertical float switch gives automatic operation in narrow pits. It is assembled in the USA and carries a 5-year warranty.
LANCHEZ 1HP 6600 GPH Submersible Sewage Pump
Its 1 HP motor moves up to 6,600 GPH and lifts water 27 ft, with a tethered float switch and a 3-year warranty.
- Motor size: 1 HP
- Max flow: 6,600 GPH
- Max lift / head: 27 ft
- 3-year warranty stated
Good for
- Owners who need 6,600 GPH at ground level
- Buyers who want a 10-foot cord for farther placement
Skip it if
- You need to lift water past 27 ft
- You need to carry the pump up stairs, since it weighs 29.12 lb
It has a 1 HP PSC copper motor in a cast iron casing, with built-in thermal overload protection that stops the motor from burning out during dry running. The adjustable float switch turns the pump on and off with the water level, and the 10-foot cord reaches farther locations. At 0 feet it pumps up to 6,600 GPH, and at 5 feet it pumps 5,644 GPH.
How to choose
Flow and lift decide the pick
Flow in GPH says how much water the pump moves, and lift in feet says how high it can push that water. Flow drops as lift rises: the LANCHEZ pump moves 6,600 GPH at 0 feet and 5,644 GPH at 5 feet. So compare the flow at the lift your basin needs: the FOTING at 9,000 GPH with a 29 ft lift, the Acquaer at 6,400 GPH with a 29 ft lift, the LANCHEZ at 6,600 GPH with a 27 ft lift, and the WAYNE at 5,490 GPH.
Float switch type and pit size
A tethered float switch swings on a cord, so it needs room to move in the basin. A vertical float switch rides up and down on a rod, so it fits narrow pits. The Acquaer, FOTING and LANCHEZ pumps use tethered float switches, and the WAYNE pump uses a vertical float switch. Check the switch type against the width of your sump pit before you choose.
Solids, casing and warranty
Sewage pumps pass solids, so check the size each pump handles. The Acquaer and FOTING pumps pass 2-inch solids through a 2-inch NPT discharge. All four pumps have cast iron casings, and the WAYNE adds stainless steel. Warranty terms run 2 years on the Acquaer, 3 years on the FOTING and LANCHEZ, and 5 years on the WAYNE.
FAQ
What GPH sump pump do I need for a basement?
Match the flow to the water your basement takes in and the lift to the discharge point. In this list the FOTING moves up to 9,000 GPH, the LANCHEZ 6,600 GPH, the Acquaer 6,400 GPH and the WAYNE 5,490 GPH.
What is the difference between a tethered and a vertical float switch?
A tethered switch swings on a cord and needs room to move, while a vertical switch rides straight up and down and fits narrow pits. The WAYNE pump uses a vertical switch, and the other three pumps use tethered switches.
Can these sump pumps pass solids?
The Acquaer and FOTING pumps pass 2-inch solids through a 2-inch NPT discharge, which suits sewage and effluent use.
How long is the power cord on these sump pumps?
The Acquaer, FOTING and LANCHEZ pumps each come with a 10-foot power cord.


