Sump Pumps
Best Vertical Sump Pump (2026): 5 Models Side by Side
As an Amazon Associate I earn from qualifying purchases. Specs below come from each product's Amazon listing; we do not test products in person.
For a vertical sump pump, the WAYNE CDU800 leads: its vertical float switch is tested to 1 million cycles, and it moves up to 5,100 GPH with a 3-year warranty. The FLUMEXXON has the highest flow here at 7,200 GPH, while the Acquaer pairs 6,000 GPH with a 27 ft lift.
Starting out? See the main guide: Best Sump Pump
Top picks at a glance
-
Best OverallWAYNE CDU800 1/2 HP Submersible Sump Pump9.8 View on Amazon -
9.6 View on Amazon -
Highest FlowFLUMEXXON 3/4 HP Sump Pump9.5 View on Amazon -
9.3 View on Amazon -
9.2 View on Amazon
Compare the specs
Ranked on motor size, max flow, max lift / head from each listing, plus how many buyers have rated it. A dash (—) means we could not confirm that figure from the listing.
| Pick | Motor size | Max flow | Max lift / head | Stainless steel | Weight | Warranty |
|---|---|---|---|---|---|---|
| 1. WAYNE CDU800 1/2 HP Submersible Sump Pump | 0.5 HP | 5,100 GPH | — | Yes | 12 lb | 3-year |
| 2. Acquaer 1/2 HP Submersible Sewage Pump | — | 6,000 GPH | 27 ft | — | — | — |
| 3. FLUMEXXON 3/4 HP Sump Pump | — | 7,200 GPH | 32 ft | — | 33 lb | 2-year |
| 4. FLUENTPOWER 3/4HP 3000 GPH Submersible Sump Pump | — | 3,000 GPH | 26 ft | — | 9.6 lb | — |
| 5. Superior Pump 92572 1/2 HP Thermoplastic Submersible | 0.5 HP | 3,300 GPH | 25 ft | — | 9.2 lb | 3-year |
WAYNE CDU800 1/2 HP Submersible Sump Pump
A 1/2 HP vertical-float pump with up to 5,100 GPH, a cast iron and stainless steel build, and a 3-year warranty.
- Motor size: 0.5 HP
- Max flow: 5,100 GPH
- Stainless steel
- 3-year warranty stated
Good for
- You want a vertical float switch tested to 1 million cycles
- You want 5,100 GPH with a 3-year warranty
Skip it if
- You need more than 5,100 GPH of flow
- You need a 3/4 HP motor
The vertical float switch is tested to 1 million cycles for automatic operation, and the top suction design minimizes clogging and eliminates air lock without a weep hole. The 1-1/2 inch NPT discharge meets standard building codes, and the pump is assembled in the USA. It weighs 12 lb and carries a 3-year warranty.
Acquaer 1/2 HP Submersible Sewage Pump
A 1/2 HP pump with up to 6,000 GPH, a 27 ft lift, and a vertical float switch with automatic and manual control.
- Max flow: 6,000 GPH
- Max lift / head: 27 ft
Good for
- You want 6,000 GPH with a 27 ft lift
- You want automatic and manual control from a piggyback plug
Skip it if
- You need more than 6,000 GPH of flow
- You need a pump rated for septic tanks
The vertical float switch starts the pump when water rises above 14.5 inches and stops it below 6.3 inches, and the piggyback plug gives automatic and manual control. The vortex impeller handles solids up to 2 inches through a 2-inch NPT discharge, and thermal overload protection shuts the pump off when it runs dry. It has a 10 ft UL-listed power cord and a 2-year support period. It is not for septic tanks.
FLUMEXXON 3/4 HP Sump Pump
A 3/4 HP pump with up to 7,200 GPH and a 32 ft max head, in cast iron with an automatic vertical float switch.
- Max flow: 7,200 GPH, the highest here
- Max lift / head: 32 ft
- 2-year warranty stated
Good for
- You want the highest flow here at 7,200 GPH
- You want a 32 ft max head for a deep lift
Skip it if
- You need a pump under 10 lb
- You need a 3-year warranty
The 3/4 HP motor delivers up to 7,200 GPH with a 32 ft max head, and the cast iron housing and pump body suit wastewater work. The 2-inch NPT discharge handles solids up to 2 inches, and the automatic vertical float switch starts and stops the pump with the water level. It has a 10 ft power cord, weighs 33 lb and carries a 2-year warranty.
FLUENTPOWER 3/4HP 3000 GPH Submersible Sump Pump
A 3/4 HP pump with up to 3,000 GPH, a 26 ft max head, and a vertical float switch with auto and manual modes.
- Max flow: 3,000 GPH
- Max lift / head: 26 ft
Good for
- You want manual draining down to about 0.4 in
- You want a check valve included in the box
Skip it if
- You need more than 3,000 GPH of flow
- You need a pump for sewage
The vertical float switch cycles the pump as water rises and falls, and the piggyback plug gives automatic mode while bypassing the switch gives manual mode for draining to about 0.4 in. The box includes a 3/4 inch garden-hose adapter, a 1 inch NPT adapter and a check valve. A carry handle, a 16.4 ft power cord and a 26 ft nylon rope help place and retrieve the pump. It weighs 9.6 lb. It is not for sewage or corrosive liquids.
Superior Pump 92572 1/2 HP Thermoplastic Submersible
A 1/2 HP thermoplastic pump with up to 3,300 GPH, a 25 ft lift, and a vertical float switch.
- Motor size: 0.5 HP
- Max flow: 3,300 GPH
- Max lift / head: 25 ft
- 3-year warranty stated
Good for
- You want a light 9.2 lb pump
- You want 3,300 GPH with a 3-year warranty
Skip it if
- You need more than 3,300 GPH of flow
- You need to lift water past 25 ft
The 1/2 HP pump moves up to 3,300 GPH and lifts water up to 25 ft, with a vertical float switch that turns the pump on and off automatically. The thermoplastic build weighs 9.2 lb, and the 1-1/2 inch NPT discharge suits high capacity pumping. It has a 10-foot cord and a 3-year limited warranty, and each pump is 100% factory tested.
How to choose
Flow and lift
Flow in gallons per hour and lift in feet are the two figures that decide how much water a pump moves and how high it pushes it. The FLUMEXXON moves up to 7,200 GPH with a 32 ft max head, the Acquaer moves up to 6,000 GPH with a 27 ft lift, and the WAYNE moves up to 5,100 GPH. The Superior Pump moves up to 3,300 GPH with a 25 ft lift, and the FLUENTPOWER moves up to 3,000 GPH with a 26 ft max head. The FLUENTPOWER maxima do not occur together, so compare the figures against the height your water must climb.
Vertical float switches
Every pump here uses a vertical float switch, which starts the pump when water rises and stops it when water falls. The WAYNE switch is tested to 1 million cycles. The Acquaer starts when water rises above 14.5 inches and stops below 6.3 inches, and the FLUENTPOWER starts at about 5.5 inches and stops at an adjustable 1.6 to 2.4 inches. The Acquaer adds manual control through a piggyback plug, while the FLUENTPOWER piggyback plug gives automatic mode and manual mode comes from bypassing the float switch. Check the start and stop levels against the depth of your sump basin.
Solids, discharge and fit
Match the discharge and the solids the pump handles to the water in your basin. The Acquaer and the FLUMEXXON have 2-inch NPT discharges and handle solids up to 2 inches, while the WAYNE and the Superior Pump have 1-1/2 inch NPT discharges. The FLUENTPOWER handles clean water with small particles up to 1/5 inch and includes a check valve with its adapters. The FLUENTPOWER needs a basin at least 12 inches in diameter with free float movement, so check your basin size before you buy.
FAQ
What does GPH mean on a sump pump?
GPH means gallons per hour, the rated flow of the pump. The FLUMEXXON is rated at up to 7200 GPH, the Acquaer at up to 6000 GPH, the WAYNE at up to 5100 GPH, the Superior Pump at up to 3300 GPH and the FLUENTPOWER at up to 3000 GPH. Match the figure to the water your basin takes in.
How does a vertical float switch work?
The switch rises with the water and starts the pump, then falls and stops it. The Acquaer starts above 14.5 inches and stops below 6.3 inches, and the FLUENTPOWER starts at about 5.5 inches and stops at an adjustable 1.6 to 2.4 inches. The WAYNE switch is tested to 1 million cycles.
Can these pumps handle sewage?
It depends on the pump. The Acquaer is made for sewage, and the FLUMEXXON is made for sewage and effluent and also for septic systems. The FLUENTPOWER handles clean water only and is not for sewage, and the Acquaer is not for septic tanks. Check the maker's stated uses before you buy.
What size discharge do these pumps have?
The Acquaer and the FLUMEXXON have 2-inch NPT discharges, and the WAYNE and the Superior Pump have 1-1/2 inch NPT discharges. The FLUENTPOWER includes a 3/4 inch garden-hose adapter and a 1 inch NPT adapter. Match the fitting to your discharge pipe.



