How-to · Under-Sink Water Filters
How to Clean a Water Filter System
To clean a water filter system, shut off the water and unplug the unit if it uses power, then take out the cartridge and wash the housing with water. Wipe the fittings, fit a new cartridge when the maker's stated life is up, and run water through the faucet after you put it back together. Follow the maker's manual for your system.
Shut off the water and power
Close the supply valve that feeds the system, then unplug the unit if it uses power. Open the faucet the system feeds and let the water run until it stops, so the pressure drops before you open the housing. Keep a towel and a bucket under the housing to catch the water that drains out when you open it.
Take out the cartridge
Follow the manual to release the housing and lift out the cartridge. Set the cartridge on a towel and look at it: a grey or dark surface, a slow flow at the faucet or a smell from the housing are signs it is due for a change. If the cartridge is still within the maker's stated life, set it aside while you wash the housing.
Wash the housing and fittings
Rinse the inside of the housing with water and wipe it with a soft cloth. Use mild dish soap or white vinegar only if the manual allows it, and rinse again so no soap or vinegar stays behind. Never mix cleaners, and never use bleach. Wipe the outside of the unit and the faucet the same way, and let every part dry before you put it back together.
Fit a new cartridge
When the cartridge reaches the end of the maker's stated life, fit a new one of the maker's own type. Seat it as the manual shows and close the housing, turning it until it sits firm. Do not force a cartridge that will not seat; take it out and check that it is the right type for your system.
Flush the system and check for drips
Turn the water back on and plug the unit back in if it uses power. The Electrolux runs automatic membrane flushing through its app, so start a flush there before you use the faucet. Run water through the faucet until it runs clear, then look at every joint for drips and shut the water off again if you see one.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Electrolux PureOne 1200GPD Tankless Reverse Osmosis Under
Its single all-in-one RO filter has 12 stages and a 24-month life, and the app runs automatic membrane flushing to help reduce mineral buildup.
View on Amazon -
Waterdrop 10UA Under Sink Water Filter System
Its twist-and-lock filter is NSF/ANSI 42 certified with a 12-month or 11,000-gallon life, and it connects to a cold-water line.
View on Amazon -
ICEPURE Under Sink Water Filter System
Its carbon filter is NSF/ANSI 42 and 372 certified with a 22,000-gallon or 3-year life and a 2-second filter change.
View on Amazon -
CuZn UC-200 Under Sink Water Filter
Its 3-stage filter uses Micro Sediment Membranes, KDF-55 and Coconut Shell Carbon, with a 5-year filter life.
View on Amazon
These come from our ranked list Best Under Sink Water Filter, which compares them spec by spec.
FAQ
How often should I change the filter in my system?
Follow the schedule in the maker's manual. The makers state 24 months for the Electrolux, 12 months or 11,000 gallons for the Waterdrop, 3 years or 22,000 gallons for the ICEPURE, and 5 years for the CuZn.
Can I use vinegar or soap to clean the filter housing?
Use water and a soft cloth first. Use mild dish soap or white vinegar only if the manual allows it, and never mix cleaners or use bleach.
What should I do if the system drips after cleaning?
Shut off the water and unplug the unit if it uses power. Check that the cartridge is seated as the manual shows, then contact the maker or a licensed plumber if it still drips.





