How-to · Under-Sink Water Filters
How to Clean a Water Filter Housing
To clean a water filter housing, shut off the water, open the housing, take out the filter, wash the housing with water and mild dish soap if the manual allows it, rinse, dry and fit the filter back. The Electrolux system flushes its membrane through the app, while the other three filters fit under the sink. Follow the schedule in the maker's manual for how often to clean it.
Watch for signs it needs cleaning
A filter that looks grey, a smell from the housing, or a light or app alert are signs the housing needs cleaning. The Electrolux system monitors filter status through its app and can flush its membrane through the app. For how often to clean it, follow the schedule in the maker's manual.
Shut off the water and unplug the unit
Unplug the unit if it uses power, and shut off the water to the filter as the maker's manual describes. Put a towel under the housing to catch water left inside, then wait until water stops coming out before you open it.
Open the housing and remove the filter
Open the housing as the manual describes and lift out the filter. Keep the filter where it will stay clean while you wash the housing, and note how it sits so it goes back the same way. Do not force the housing open; if it will not open, follow the manual or contact the maker.
Wash the housing with water and soap
Rinse the housing with water, then wash it with mild dish soap if the manual allows it. White vinegar is another option if the manual allows it. Use a soft cloth or sponge, rinse the housing with water again, and let it dry fully before the filter goes back.
Rinse, dry and check for drips
Fit the filter back as the manual describes and turn the water back on. Check around the housing for leaks, and if you find one, shut off the water and follow the manual. Follow the maker's installation manual, and hire a licensed plumber where the manual says so.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Electrolux PureOne 1200GPD Tankless Reverse Osmosis Under
A tankless reverse osmosis system with a single all-in-one filter, 12-stage filtration and automatic membrane flushing through the app.
View on Amazon -
Waterdrop 10UA Under Sink Water Filter System
An under-sink activated carbon filter, NSF/ANSI 42 certified, with a twist-and-lock fit and a filter life of 12 months or 11,000 gallons.
View on Amazon -
ICEPURE Under Sink Water Filter System
An under-sink activated carbon filter, NSF/ANSI 42 and 372 certified, with a filter life of 22,000 gallons or 3 years.
View on Amazon -
CuZn UC-200 Under Sink Water Filter
A 3-stage inline under-sink filter, NSF/ANSI 42 and 372 certified, with a 5-year filter life and a stainless steel connection hose.
View on Amazon
These come from our ranked list Best Under Sink Water Filter, which compares them spec by spec.
FAQ
What cleaners can I use on the housing?
Use only water, mild dish soap, white vinegar or the maker's own cleaner, and only if the manual allows it. Never mix cleaners.
How often should I clean the housing?
Watch for a filter that looks grey, a smell from the housing, or a light or app alert, and follow the schedule in the maker's manual. The Electrolux system monitors filter status through its app.
Do I need to replace the filter when I clean the housing?
Not always. Wash the housing, then fit the same filter back if the manual allows it. Replace the filter when the manual schedule says so, or when the filter looks grey and stays dirty after washing.





