How-to · Water Cooler Dispensers
How to Clean a Water Cooler Dispenser
Unplug the dispenser, take the bottle out, and clean the inside and the spouts with water and mild dish soap or white vinegar, only if the manual allows it. Rinse with fresh water until it runs clear, let it dry fully, then set a fresh bottle in place and plug the dispenser back in.
Unplug the dispenser and remove the bottle
Switch the dispenser off and pull the plug from the wall outlet before you touch the inside. Lift the bottle off the top on a top-load model, or slide it out of the bottom cabinet on a bottom-load model. The Avalon and Tehanld coolers load from the bottom, while the Igloo and Euhomy coolers load from the top. Press each spout over a cup to drain the water left inside, and set the bottle aside.
Wash the drip tray and wipe the spouts
The Igloo cooler has a removable drip tray. Lift it out and wash it with water and mild dish soap, then dry it before it goes back in place. Wipe each spout and the outside of the dispenser with a damp cloth and mild dish soap, and dry the outside with a clean cloth. Use the soap only if the manual allows it.
Rinse the inside through the spouts
Pour fresh water into the reservoir and run it through each spout into a container. If the manual allows it, add white vinegar to the first rinse, then run plain water through the spouts until no vinegar smell is left. Do not mix cleaners, and never use bleach. Let the inside drain fully before you put the bottle back.
Dry it and plug it back in
Wipe the outside dry and set a fresh bottle in place, then plug the dispenser back in. The Euhomy cooler has LED indicators that show when the hot and cold water are ready. Run a little water through each spout before the first use, and check that the water runs clear.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Avalon A4BLWTRCLR Bottom Loading Water Cooler Water
Its bottom-loading design takes 3 to 5 gallon bottles, and it has 3 temperature settings with hot, cold and room water.
View on Amazon -
Tehanld Bottom Loading Water Cooler Dispenser
Its bottom-loading design takes 3 or 5 gallon bottles, with hot, room and cold spouts and an LED display with an empty bottle alert.
View on Amazon -
Igloo Top Loading Water Cooler with Removable
Its top-loading design fits 3 and 5 gallon jugs, with hot and cold spigots and a removable drip tray.
View on Amazon -
Euhomy Top Load Water Dispenser for 3/5
Its top-load design takes 3 or 5 gallon bottles, with 3 temperature settings, LED indicators and a bottom storage area.
View on Amazon
These come from our ranked list Best Water Cooler, which compares them spec by spec.
FAQ
Can I use bleach to clean a water cooler dispenser?
No. Use only water, mild dish soap or white vinegar, and only if the manual allows it. Never mix cleaners, and follow the cleaning steps in the maker's manual.
How often should I clean a water cooler dispenser?
Clean it when the water tastes off, when you see residue on the spouts, or when the manual says to. Follow the schedule in the maker's manual.
Do I need to remove the bottle to clean the dispenser?
Yes. Take the bottle out before you clean, and unplug the dispenser first. The bottle stays out until the cleaning and the rinse are done.





