How-to · Water Cooler Dispensers
How to Clean a Water Cooler
To clean a water cooler, unplug it, remove the bottle, drain the water left inside, and wash the drip tray, spouts and outside with mild dish soap and water. Wipe the inside with white vinegar and water if the manual allows it, rinse with fresh water, and let the parts dry before you load a fresh bottle.
Unplug and remove the bottle
Unplug the cooler from the wall before you touch any part of it. Lift the bottle off a top-loading cooler, or open the cabinet and slide the bottle out of a bottom-loading model. Press each spout over a container to drain the water left inside, then set the empty bottle aside.
Wash the drip tray and outside
Pull out the drip tray and wash it with mild dish soap and water, then rinse it and let it dry. Wipe the cabinet, the spouts and the buttons with a damp cloth, and dry them with a clean cloth. Put the dry tray back before you move on.
Clean inside with vinegar and water
Mix white vinegar and water and pour it into the cooler only if the maker's manual allows vinegar. Run the mix through each spout into a container, then let it sit while you wipe the bottle neck and the cabinet opening. Rinse by running fresh water through each spout until the vinegar is gone.
Rinse and dry every part
Run fresh water through each spout until the water runs clear and the vinegar is gone. Wipe the spouts and the drip tray dry, and leave the cabinet door open until the inside is dry. Do not plug the cooler back in while any part is still wet.
Load a fresh bottle
Set a fresh 3 or 5 gallon bottle on a top-loading cooler, or slide it into the cabinet of a bottom-loading model. Plug the cooler back in and press each spout to fill the lines with fresh water. Check the empty-bottle indicator if your cooler has one, and keep the manual nearby for the cleaning schedule it gives.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Avalon A4BLWTRCLR Bottom Loading Water Cooler Water
Its bottom-loading cabinet takes 3 to 5 gallon bottles, its three temperature settings cover hot, cold and room water, and a nightlight lights the spouts.
View on Amazon -
Tehanld Bottom Loading Water Cooler Dispenser
Its bottom-loading cabinet takes 3 or 5 gallon bottles, the LED display shows an empty-bottle alert, and the built-in night light helps in low light.
View on Amazon -
Igloo Top Loading Water Cooler with Removable
Its top-loading design fits 3 and 5 gallon jugs, its removable drip tray catches spills, and the energy-saving switches control each temperature setting on its own.
View on Amazon -
Euhomy Top Load Water Dispenser for 3/5
Its top-loading design takes 3 or 5 gallon bottles, its three outlets serve hot, cold and warm water, and LED indicators show when hot and cold water are ready.
View on Amazon
These come from our ranked list Best Water Cooler, which compares them spec by spec.
FAQ
Can I use vinegar to clean a water cooler?
Yes, if the maker's manual allows it. Run a mix of white vinegar and water through the cooler, then rinse with fresh water until the vinegar is gone. Never mix vinegar with other cleaners.
How do I know the cooler needs cleaning?
Watch for a stale taste in the water, a film on the drip tray, or a smell from the spouts. Follow the cleaning schedule in the maker's manual, and clean the drip tray whenever it looks dirty.
What do I do with the old bottle?
Lift it off a top-loading cooler or slide it out of a bottom-loading cabinet, then load a fresh 3 or 5 gallon bottle.




