Amazon Black Friday Week deals

Paid link

How-to · Water Cooler Dispensers

How to Clean a Bottom-Load Water Dispenser

Short answer

To clean a bottom-load water dispenser, unplug it, slide the bottle out of the bottom compartment, drain the water through the spouts, and wipe the spouts, drip tray and bottle area with water and mild dish soap or white vinegar if the manual allows it. Rinse, let the parts dry, and put a fresh bottle in. Top-load models differ: you lift the jug off the top instead.

  1. Unplug and remove the bottle

    Unplug the dispenser before you clean it. On a bottom-load model, open the bottom compartment and slide the bottle out; on a top-load model, lift the jug off the top. Set the bottle aside and close the compartment door. The Avalon and Tehanld models in this guide are bottom-load, while the Igloo and Euhomy models are top-load, so the bottle step differs between them.

  2. Drain the water from the spouts

    Press each spout to drain the water left in the tank into a cup or jug, one spout at a time until the flow stops. If your dispenser has an empty-bottle indicator or a low water reminder, it lights up when the bottle needs to be replaced, so check it before you start.

  3. Wipe the spouts, tray and bottle area

    Wipe the spouts, the drip tray and the bottle compartment with a soft cloth and water with mild dish soap, or white vinegar if the manual allows it. On the Igloo, lift out the removable drip tray and wash it apart from the dispenser. Rinse each part with plain water and let it dry before it goes back in.

  4. Put a fresh bottle in and run the spouts

    Slide a fresh bottle into the bottom compartment on a bottom-load model, or set the jug on top on a top-load model. Plug the dispenser back in and run each spout into a cup until the water runs clear. If the manual gives a cleaning schedule, follow it; otherwise clean again when the tank smells or the water tastes off.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Water Cooler, which compares them spec by spec.

FAQ

How often should I clean a bottom-load water dispenser?

Follow the schedule in the maker's manual. Clean it sooner if the tank smells, the water tastes off, or the empty-bottle indicator stays lit after a fresh bottle goes in.

Can I use vinegar to clean a water dispenser?

Yes, if the manual allows it. Use white vinegar or mild dish soap with water, rinse with plain water, and let the parts dry before they go back in. Never mix cleaners. Never mix cleaners.

How is cleaning a bottom-load dispenser different from a top-load one?

On a bottom-load model you slide the bottle out of the bottom compartment, so you never lift a full bottle. On a top-load model you lift the jug off the top. The spouts, drip tray and bottle area get the same wipe-down either way.

More water cooler dispensers how-tos