Amazon Black Friday Week deals

Paid link

How-to · Window Air Conditioners

How to Clean a Window AC Without Removing It

Short answer

Unplug the window AC, then clean the filter, the front panel and the coils from inside the room, without taking the unit out of the window. Slide the filter out and wash it with water and mild dish soap if the manual allows it, wipe the front panel and the coils, and let everything dry before you plug the unit back in.

  1. Unplug the unit

    Switch the unit off and unplug it from the outlet before you touch the filter or the front panel. Keep the plug dry while you clean, and read the maker's manual for any step the manual covers for your model. Do not open the outer case or reach into parts the manual does not name.

  2. Remove and wash the filter

    Slide the filter out from the front panel. Rinse it with water and wash it with mild dish soap if the manual allows it, then rinse it again and let it dry fully before it goes back in. If the filter stays gray or torn after washing, replace it with the maker's own type.

  3. Wipe the front panel and coils

    Wipe the front panel with a damp cloth and mild dish soap if the manual allows it, then wipe it again with a clean damp cloth. Use a soft brush or a damp cloth on the coils behind the filter to lift dust, working from the top down. Wipe up the dust that falls, and let the panel and the coils dry before you put the filter back.

  4. Clear the drain and the base

    Look for the drain hole at the base of the unit and clear it with a soft brush or a damp cloth so water can leave the unit. Wipe the base pan and the area under the unit, and clear leaves and dust from the grille where you can reach it. If water stays in the base or the drain will not clear, contact the maker or a repair service.

  5. Put the filter back and plug in

    Slide the dry filter back into the front panel and close the panel. Plug the unit back in and run it on fan only for a short while to check that air moves through the filter and the panel is dry. If the unit will not start or a filter light stays on, read the maker's manual or contact the maker.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Window AC Unit, which compares them spec by spec.

FAQ

Can I clean a window AC without removing it?

Yes. Unplug the unit, slide the filter out and wash it, wipe the front panel and the coils, and clear the drain hole, all from inside the room. Let everything dry before you plug the unit back in.

How often should I clean the filter?

Clean it when the filter looks gray, when airflow drops, or when a filter light asks. Follow the schedule in the maker's manual for your model.

Can I use vinegar on a window AC?

Use white vinegar only if the manual allows it. Do not mix cleaners. Water and mild dish soap are the cleaners to use when the manual allows them.

More window air conditioners how-tos