Amazon Black Friday Week deals

Paid link

How-to · Window Air Conditioners

How to Clean a Window AC Unit

Short answer

To clean a window AC unit, switch it off, unplug it, and take out the washable filter. Wash the filter with water and mild dish soap if the manual allows it, wipe the front panel and the louvers, and let the filter and the panel dry fully before you put the filter back and plug the unit in.

  1. Switch off and unplug the unit

    Switch the unit off at the controls and pull the plug from the outlet before you touch the filter or the front panel. Keep the plug and the cord dry while you clean. Read the maker's manual for the cleaning steps for your own unit, since controls and filters differ from unit to unit.

  2. Take out and wash the filter

    Slide the filter out of the front panel. Rinse it with water and wash it with mild dish soap if the manual allows it, then rinse it again and let it dry fully before it goes back in. A filter that still looks grey after washing needs replacing with the maker's part. The GE, Frigidaire and ROVSUN units here have washable filters, and the Frigidaire unit gives a Clean Filter alert when it is time to clean the washable dust filter.

  3. Wipe the front panel and louvers

    Wipe the front panel and the louvers with a damp cloth and mild dish soap if the manual allows it. Work around the controls and the display without pushing water into them. The ROVSUN unit has an LED display and a swing button for the louvers, and the GE unit has dials for temperature and fan speed, so wipe around them with a barely damp cloth.

  4. Clean the outside of the unit

    Wipe the outside case with a damp cloth and mild dish soap if the manual allows it. Keep the vents on the outside clear of dust and leaves so air can move through the unit. Do not open the case or reach inside the unit: for anything past the filter and the front panel, contact the maker or a repair service.

  5. Put the filter back and plug in

    Put the dry filter back in the front panel and push it in until it sits flat. Plug the unit back in, switch it on, and set the controls to the settings you want. If the unit does not cool as it did before, read the maker's manual or contact the maker or a repair service.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Window AC Unit, which compares them spec by spec.

FAQ

Can I wash the filter with water?

Yes, if the manual allows it. The GE, Frigidaire and ROVSUN units here have washable filters. Rinse the filter with water and mild dish soap, then let it dry fully before it goes back in.

Can I use bleach to clean the unit?

No. Use only water and mild dish soap if the manual allows it, and never mix cleaners. Read the maker's manual for the cleaner it allows for your own unit.

How do I know the filter is dry enough?

It must feel dry all over before you put it back. Feel the filter on both sides, and check the frame and the edges for damp spots. Put it back only when it is dry to the touch.

Do I need to take the unit out of the window?

Clean the filter and the front panel with the unit in place. Leave the unit in the window unless the maker's manual says to remove it.

More window air conditioners how-tos