How-to · Window Air Conditioners
How to Wash a Window Air Conditioner
To wash a window air conditioner, unplug it, remove the filter and wash it with water and mild dish soap if the manual allows it, then wipe the coils and cabinet with a damp cloth and let everything dry fully before you put the filter back and switch the unit on. Wash the filter when it looks grey or dusty, and follow the schedule in the maker's manual.
Unplug the unit and remove the filter
Switch the unit off and unplug it from the wall before you touch anything inside. Open the front panel and slide the filter out, holding it flat so loose dust falls into the trash and not back into the unit. If the filter looks grey or dusty, it is ready for a wash. Check the maker's manual for how the filter comes out on your model.
Wash the filter and let it dry
Rinse the filter under running water and wash it with mild dish soap if the manual allows it. Use your fingers or a soft cloth to work the dirt out of the mesh, and rinse until the water runs clear. Shake off the extra water and set the filter on a towel to dry fully. Never put a damp filter back in the unit, since trapped water can cause smells.
Clean the coils and fins
With the filter out, vacuum the coils behind it with a brush attachment to lift off dust. Wipe the coils and the fins with a damp cloth, and wash the cloth in water and mild dish soap if the manual allows it. Work gently around the fins, since they bend easily and bent fins slow airflow. If the coils look caked with dirt, wipe them again rather than forcing anything.
Wipe the cabinet and clear the drain
Wipe the outside of the unit with a damp cloth, and wash the cloth in water and mild dish soap if the manual allows it. Wipe the inside edges of the front panel and the drip tray if your model has one. Look for the drain opening at the back of the unit and clear any dirt from it with a cloth. Do not push anything sharp into the opening.
Put the filter back and switch on
Make sure the filter and the inside of the unit are fully dry before you put the filter back. Slide the filter into place and close the front panel. Plug the unit back in and switch it on, then run the fan until the air from the unit feels dry. If the unit still smells or the airflow stays weak, check the filter and the coils again or contact the maker.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
GE Window Air Conditioner
Its washable, reusable filter slides out for cleaning, and the unit needs no manual draining under normal conditions.
View on Amazon -
Frigidaire 6,000 BTU Window Air Conditioner
Its Clean Filter alerts tell you when to clean the washable dust filter, and the remote control adjusts the temperature settings.
View on Amazon -
ROVSUN 8000 BTU Window Air Conditioner
Its washable filter is easily accessed from the front panel for regular cleaning.
View on Amazon -
Amazon Renewed Midea 5,000 BTU 150 Sq ft Mechanical
It fits windows 23 to 36 inches wide with a minimum height of 13 inches, and it has 2 cooling modes and 2 fan speeds.
View on Amazon
These come from our ranked list Best Window AC Unit, which compares them spec by spec.
FAQ
Can I wash a window air conditioner filter with water?
Yes, if the maker's manual says the filter is washable. Wash it with water and mild dish soap, rinse it, and let it dry fully before you put it back. Replace the filter when it stays dirty after washing.
How often should I wash a window air conditioner?
Wash the filter when it looks grey or dusty, and follow the schedule in the maker's manual. If the unit smells or the airflow drops, check the filter and the coils first. A filter that stays dirty after washing needs replacing.
Can I use vinegar to clean a window air conditioner?
White vinegar is one of the cleaners the manual may allow for the filter and the cabinet. Use water and mild dish soap first, and only use vinegar if the manual allows it. Never mix cleaners.
Do I need to take the unit out of the window to wash it?
No. You can wash the filter, coils and cabinet with the unit in place, as long as you unplug it first. If you do lift the unit out, follow the maker's manual for removing and refitting it.





