How-to · Espresso Machines
How to Steam Milk With an Espresso Machine
To steam milk with an espresso machine, pour cold milk into a jug, purge the steam wand, then hold the wand tip just under the milk surface while steam adds air and heat. Stop when the jug feels hot to the touch, wipe the wand clean, and pour the milk into your espresso. The machines below each have a steam wand or a froth system for this job.
Pour cold milk into a jug
Start with cold milk from the refrigerator and pour it into a metal jug that fits under the steam wand, leaving room at the top for the milk to grow as foam forms. Cold milk gives you more time to add air before the milk heats up. If your machine has preset programs, pick the steamed milk setting as the manual describes.
Purge the steam wand first
Before the wand touches the milk, run steam from it for a moment into a cup or the drip tray. This clears water that sits in the wand so it does not go into the milk. The wand is ready when steam comes out in a steady stream. Purge the wand again after you finish steaming, so milk does not dry inside it.
Add air, then heat the milk
Hold the jug so the wand tip sits just under the surface of the milk, then open the steam. You will hear a gentle hissing sound as air mixes into the milk and the foam starts to grow. Once the milk has the foam you want, lower the wand deeper into the jug so the steam heats the milk and keeps it swirling. Keep the tip under the surface so it does not spray milk out of the jug.
Stop when the jug feels hot
Judge the heat by the jug, not by a number on a dial. When the jug feels hot to the touch and the milk swirls in a smooth circle, close the steam and lift the wand out. The milk should look glossy with fine foam on top. If the milk boils or tastes burnt, it went too far, so start again with fresh cold milk and stop sooner.
Wipe the wand and pour the milk
Wipe the steam wand with a damp cloth right after you lift it out, then run steam for a moment to clear milk from the tip. Tap the jug on the counter to pop large bubbles, swirl the milk until it looks smooth, and pour it into the espresso in a slow, steady stream. Clean the jug with water and mild dish soap if the manual allows it.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Ninja Luxe Café Premier 3-in-1 Espresso Machine
A 3-in-1 machine with a dual froth system and four preset programs, including steamed milk, that froths hands-free from the included milk jug.
View on Amazon -
CASABREWS CM5418 Compact Espresso Machine with Milk
A compact machine with a 20-bar pump, a steam wand for microfoam, a built-in pressure gauge, and a 34 oz water tank.
View on Amazon -
CHULUX Slim Espresso Machine with Milk Frother
A slim machine with a 20-bar pump, a steam wand for microfoam, a pressure gauge, and a 40 oz water tank.
View on Amazon -
Maestri House Compact Espresso Machine
A compact machine with a 20-bar pump, a steam wand for milk froth, a 1.3L detachable water tank, and an auto clean function.
View on Amazon
These come from our ranked list Best Espresso Machine, which compares them spec by spec.
FAQ
Can I use any milk to steam?
Yes. Foam differs by milk, so try the milk you drink and adjust how much air you add until the foam looks the way you like it.
Why does my steamed milk have large bubbles?
Large bubbles come from adding too much air or holding the wand tip too high above the milk. Keep the tip just under the surface, add air in short bursts, and tap the jug to pop bubbles before you pour.
Do I need a special jug to steam milk?
A metal jug works well because it holds heat and lets you feel the temperature through the wall. The Ninja machine comes with a milk jug, and other jugs that fit under the steam wand work too. Pick a jug with a spout for pouring.





