How-to · Reverse Osmosis Systems
How to Clean a Reverse Osmosis Tank
Drain the tank through the faucet until the water stops, then flush it and let it refill, following the steps in the maker's manual. Use only water unless the manual allows the maker's own cleaner.
Check whether your system has a tank
Two systems here have a tank, and two do not. The iSpring RCC7AK-BN includes a storage tank, and the APEC ROES-50 includes a water tank. The Electrolux PureOne and the Waterdrop G5P500A are tankless, with no tank under the sink. On a tankless system there is no tank to drain. The Electrolux PureOne flushes its membrane through the app, so follow the maker's steps for it instead of the tank steps below.
Drain the tank through the faucet
Open the faucet and let the tank empty through it. Keep the faucet open until the flow slows to a trickle and then stops, which means the tank has drained. Do not open the tank itself. If the flow does not stop, close the faucet and read the maker's manual before you go further.
Flush the tank with water
With the tank empty, let water run into it and out through the faucet again, following the flush steps in the maker's manual. Use only water for the flush, unless the manual allows the maker's own cleaner or descaler. Repeat the fill and drain until the water from the faucet runs clear, then let the tank refill before you drink from it.
Look after the filters and housing
A tank that needs cleaning often sits beside filters that need attention. The iSpring system has a transparent first-stage housing that makes it easy to monitor buildup, so a filter that looks grey or dark is a sign to change it. The Electrolux system shows filter status in its app and flushes its membrane on a schedule. The APEC system recommends replacing filters every 6 to 24 months, based on incoming water quality. Replace filters with the maker's own type, as the manual says.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Electrolux PureOne 1200GPD Tankless Reverse Osmosis Under
A tankless 1200 GPD system with 12-stage filtration and app monitoring, with automatic membrane flushing to help reduce mineral buildup.
View on Amazon -
iSpring RCC7AK-BN NSF Certified
A 75 GPD 6-stage system with a storage tank, a transparent first-stage housing, and NSF/ANSI 58 certification for the whole system.
View on Amazon -
Waterdrop G5P500A Reverse Osmosis System
A tankless 500 GPD system with 8-stage filtration, NSF/ANSI 58 and 372 certification, and a 2:1 pure to drain ratio.
View on Amazon -
APEC Water ROES-50
A 50 GPD 5-stage system with a water tank, NSF/ANSI 58 and 372 certification, and quick connection fittings with colored tubing.
View on Amazon
These come from our ranked list Best Reverse Osmosis, which compares them spec by spec.
FAQ
Do tankless reverse osmosis systems need tank cleaning?
Tank cleaning applies to systems with a storage tank, such as the iSpring RCC7AK-BN and the APEC ROES-50. The Electrolux PureOne and Waterdrop G5P500A are tankless systems, and the Electrolux system flushes its membrane through the app instead.
How do I know when to clean the tank?
Watch for a tank that smells, water that tastes off, or a filter light or app alert. Follow the schedule in the maker's manual for cleaning and filter changes.
Can I use vinegar to clean the tank?
Only if the maker's manual allows it. Rinse with water first, and use the maker's own cleaner or descaler when the manual names one.



![[Dual Flow] Waterdrop WD-T4-A Alkaline pH+ Reverse](https://m.media-amazon.com/images/I/719YgI8NGvL._SL1500_.jpg)
