Amazon Black Friday Week deals

Paid link

How-to · Reverse Osmosis Systems

How to Service a Reverse Osmosis System

Short answer

To service a reverse osmosis system, check the filter housings and faucet for drips, replace the filter cartridges as the maker's manual directs, and check the lines for wear. If your model has a storage tank, check it too. Use only the maker's replacement filters and follow the schedule in the manual for the model you have.

  1. Check for drips and wear

    Look under the sink at the filter housings, tubing, fittings and faucet base while the system is running and after you turn the faucet on and off. Note any drip, damp spot, stain or cracked tubing, and note the color of the water in the first-stage housing on a model with a clear housing. Write down what you see before you touch anything, so you can describe it to the maker or a repair service if a part needs attention.

  2. Replace the filter cartridges

    Turn off the feed water and the faucet as the maker's manual shows, then open the faucet to release pressure before you open a housing. Unscrew one housing at a time, lift out the old cartridge, and fit the maker's replacement cartridge for that housing, matching the order in the manual. Wipe the housing with water and mild dish soap if the manual allows it, check the seal, and close the housing by hand as the manual directs.

  3. Flush the membrane

    On a model with app flushing, the app runs the membrane flush on a schedule, so check the app and let the flush run as the manual directs. Let the system run until the water from the faucet looks and tastes as it did before service. If flow stays low or the water stays cloudy after a flush, contact the maker or a repair service rather than opening parts inside the system.

  4. Check the tank and faucet

    If your model has a storage tank, check it for dents, damp patches and a loose valve, and check the faucet for a drip or a loose base. Turn the faucet on and let the water run, then turn it off and watch the base and the lines under the sink for a short time. If you find a drip, a damaged line or a tank that needs attention, follow the manual and contact the maker or a repair service for the next step.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Reverse Osmosis, which compares them spec by spec.

FAQ

How do I know a filter cartridge needs replacing?

Look for a change in flow or taste, a grey cartridge, a light or app alert, or a housing that shows buildup. Follow the schedule in the maker's manual for your model, and use only the maker's replacement cartridge for that housing.

Can I clean a reverse osmosis filter housing with soap?

Yes, if the maker's manual allows it, use water and mild dish soap on the housing, then rinse it and let it dry before you fit a new cartridge. Never mix cleaners, and use only the maker's own cleaner or descaler if the manual calls for one.

What should I do if the system leaks after service?

Turn off the feed water as the manual shows, check that the housings are closed by hand and that the seal sits flat, and dry the area so you can see where the drip starts. If the drip continues, contact the maker or a repair service.

More reverse osmosis systems how-tos