Amazon Black Friday Week deals

Paid link

How-to · Reverse Osmosis Systems

What Size Reverse Osmosis Filter Do You Need

Short answer

The size of a reverse osmosis filter means two things: how much water the system makes each day, measured in gallons per day, and how much space it takes under the sink. The systems in this guide make from 50 to 1200 gallons per day. Match the gallons per day figure to the water your household uses, and check the footprint against the space under your sink.

  1. Read the gallons per day figure

    Gallons per day, written as GPD, is the figure that sets the size of a reverse osmosis system. It tells you how much filtered water the system can make in a day. The systems in this guide are rated at 50, 75, 500 and 1200 gallons per day. A higher figure means more water in a day, so compare the figure with how much water your household drinks and cooks with. The figure comes from the maker, so read it on the listing and check it against your own daily use.

  2. Count the filter stages

    Filter stages are the separate steps the water passes through inside the system. The systems in this guide have 5, 6, 8 and 12 stages. The Electrolux PureOne uses a single all-in-one filter with 12 stages, so only one cartridge needs replacing. The iSpring system has 6 stages and adds minerals back into the water, and the Waterdrop system has 8 stages with the same mineral step. Count the stages on the listing and note whether the system adds minerals, since that changes what comes out of the tap.

  3. Tankless or tank

    Some systems store water in a tank, and others make it as you use it. The Electrolux PureOne and the Waterdrop G5P500A are tankless, so no tank sits under the sink. The iSpring and APEC systems come with a storage tank, which holds water ready to use. A tankless system frees space under the sink, while a tank system holds a ready supply. Check the listing for the word tankless, and measure the space under your sink before you choose.

  4. Check the footprint and the faucet

    The footprint is the width, depth and height of the unit under the sink. The Electrolux PureOne measures 17.1 by 7.1 by 10.3 inches, so check those figures against the space under your sink. The Waterdrop faucet measures 6.6 by 3.2 by 11.3 inches, and its faucet installation needs holes drilled in the countertop. Read the maker's installation manual for your model, and hire a licensed plumber where the manual says so.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Reverse Osmosis, which compares them spec by spec.

FAQ

What does gallons per day mean on a reverse osmosis system?

It is the amount of filtered water the system can make in one day, as rated by the maker. The systems in this guide are rated at 50, 75, 500 and 1200 gallons per day, so compare the figure with how much water your household uses each day.

Does a tankless system need a storage tank?

No. A tankless system makes water as you use it, so no tank sits under the sink. The Electrolux PureOne and the Waterdrop G5P500A are tankless, while the iSpring and APEC systems come with a storage tank.

How do I know when to change the filter?

Follow the schedule in the maker's manual for your model. The Electrolux filter lasts up to 2 years, the iSpring and APEC filters have a 6-month filter life cycle, and the Waterdrop system has 2 pre-installed filters. Watch for the filter status in the app where the system has one.

More reverse osmosis systems how-tos