Amazon Black Friday Week deals

Paid link

How-to · Steam Mops

Can You Steam Mop Laminate Floors

Short answer

Yes, you can steam mop laminate floors when the floor is sealed and you keep the steam low and the mop moving. Use the low steam setting, pass over each area once, and let the floor dry between passes. Check the flooring maker's manual first, and skip steam on laminate with gaps, swelling, or peeling edges.

  1. Check the floor first

    Look for gaps, swollen seams, or edges that lift. Steam and standing water can work into those spots, so hold off on any area that is not sealed flat. Read the flooring maker's manual for its cleaning guidance before you start, and follow what it says about steam. If the manual says nothing about steam, keep the mop on its low setting and mop a small, hidden area first, then look at it once it dries.

  2. Set the steam low

    Fill the tank with water only, then wait for the mop to heat up before it touches the floor. Set the steam to its low mode for laminate, since a light pass leaves less water behind than a heavy one. Keep the mop moving in slow, even strokes and pass over each area once. Lift the mop and let the floor dry before you go over the same spot again.

  3. Mop with a fresh pad

    Start with a clean, dry mop pad so dirt on the pad does not drag across the floor. Sweep or vacuum first to pick up grit that could scratch the surface as you mop. Swap the pad when it looks dirty or feels heavy with water, since a wet pad leaves more water on the floor. The Neugo comes with 2 washable pads, and the Bissell uses washable microfiber pads, so you can change pads mid-job and wash them after.

  4. Dry the floor after

    When you finish, look over the floor for wet spots or water sitting in seams. Wipe up any standing water with a dry cloth so it does not soak into the joints. Empty the tank and let the mop pad dry before you store the mop. A dry floor and a dry pad keep the next cleaning pass from starting with damp gear.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Steam Mop for Laminate Floors, which compares them spec by spec.

FAQ

Will steam warp laminate floors?

Steam can push water into seams and joints, and water left sitting on laminate can swell the edges over time. Keep the steam low, keep the mop moving, and wipe up any standing water right away. Skip steam on laminate that already shows gaps or swelling.

What steam setting should I use on laminate?

Use the low steam setting your mop offers. The Neugo lists a min mode for hardwood floors, the Amzart has a low setting for daily cleaning, and the Bissell lets you choose low steam. A light pass leaves less water on the floor than a heavy one.

Can I use a steam mop on laminate every week?

You can steam mop laminate when the floor needs it and the surface stays sealed and flat. Watch for seams that lift or edges that swell, and hold off on steam if you see them. Follow the flooring maker's manual for how often to clean.

More steam mops how-tos