How-to · Steam Mops
How Does a Steam Mop Work
A steam mop heats water in its tank until it turns to steam, then pushes that steam through a mop pad onto the floor. The hot steam loosens dirt on the surface, and the pad picks it up as you push the mop forward. You fill the tank with water, wait for it to heat up, and mop sealed hard floors in slow passes.
Fill the tank with water
Lift out the tank or open its cap and fill it with water. The LABIGO warns that adding chemical cleaners may clog the steam nozzle, so use water only unless your manual says otherwise. Fill at the sink, close the cap firmly, and set the tank back in place before you plug the mop in.
Wait for the steam to build
Plug the mop in and wait for it to heat up. Heat-up times differ by model: the LABIGO heats up in 10 seconds, the Shark in 25 seconds, and the PurSteam and BISSELL in 30 seconds. Wait until the mop is ready before you start, so the pad gets a steady flow of steam from the start.
Mop in slow, even passes
Push the mop across the floor in slow, overlapping passes and let the steam do the work. Use the low setting for daily cleaning and delicate surfaces, and switch to a higher setting for stuck-on messes. The LABIGO has 2 steam levels, while the BISSELL and Shark each have 3 steam settings. Lift the pad and check it as you go, and swap in a fresh washable pad when it looks dirty.
Use the handheld steamer
Some of these mops come apart so the steamer works on its own. The LABIGO and PurSteam both detach into a handheld steamer for tiles, grout, windows, sofas and other surfaces, with brushes and nozzles for tight spots. Keep the handheld upright while you work, and point the nozzle away from your hands.
Empty the tank and wash the pads
When you finish, unplug the mop and let it cool before you touch the tank or the pad. Empty any water left in the tank, and wash the mop pads so they dry before the next use. The BISSELL and Shark pads are washable, and the PurSteam cloths wash too. Store the mop with the cord wrapped and the pads off the floor.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
LABIGO Steam Cleaner 10-in-1 Detachable Handheld Steam Mop
It heats up in 10 seconds, holds 0.35 L in its tank, and detaches into a handheld steamer with 2 steam levels.
View on Amazon -
PurSteam 10-in-1 Steam Mop
It heats up in 30 seconds, holds 0.38 L, and detaches into a handheld steamer with a swivel head and washable cloths.
View on Amazon -
BISSELL Steam Mop 1940A PowerFresh Floor Steam
It heats up in 30 seconds, has 3 steam settings and a flip-down scrubber, and comes with washable microfiber pads.
View on Amazon -
Shark SteamSpot Steam Mop with Steam Blaster
It heats up in 25 seconds, holds 0.5 L in a removable tank, and has 3 steam modes plus a targeted steam blast.
View on Amazon
These come from our ranked list Best Steam Mop, which compares them spec by spec.
FAQ
Do steam mops need cleaning chemicals?
No. These mops clean with steam from water in the tank, and the LABIGO warns that adding chemical cleaners may clog the steam nozzle. Check your manual before adding anything to the tank.
Can I use a steam mop on carpet?
The LABIGO and PurSteam include a carpet glider so the mop can pass over carpet, and the PurSteam cloths are made for carpet cleaning with the glider. Check your manual first, since not every steam mop is meant for carpet.
How long does a steam mop take to heat up?
It depends on the model. The LABIGO heats up in 10 seconds, the Shark in 25 seconds, and the PurSteam and BISSELL in 30 seconds.





