How-to · Steam Mops
How to Use a Steam Mop on Carpet
To use a steam mop on carpet, fit the carpet glider, fill the tank with tap water, let the mop heat up, then move it slowly across the carpet in straight passes. Use the low steam setting first and let the carpet dry before you walk on it. The four mops here heat up in 10 to 20 seconds.
Fit the carpet glider
Fit the carpet glider before you start. The LABIGO, PureSwirlz and GorFanty mops each include a carpet glider, and the GorFanty glider only needs fitting when you clean carpet. Put a washable microfiber pad on the mop head: the PureSwirlz includes 2, and the GorFanty includes 2. Step on the raised tab to remove the mop head on the LABIGO and PureSwirlz when you need to change the pad.
Fill the tank with tap water
Fill the tank with tap water only. The GorFanty uses tap water alone, and the LABIGO warns that chemical cleaners may clog the steam nozzle. The Mxnsewr uses water only for cleaning, with no chemicals added. The LABIGO and PureSwirlz tanks hold 350 ml, the GorFanty holds 300 ml, and the Mxnsewr holds 450 ml.
Heat up and choose the steam level
Wait for the mop to heat up: 10 seconds for the LABIGO, 12 seconds for the PureSwirlz, and 20 seconds for the GorFanty and Mxnsewr. Start on the low setting for carpet, and use the high setting only for stubborn stains. The LABIGO and PureSwirlz have 2 steam levels, the GorFanty has 3 modes, and the Mxnsewr adjusts steam with a knob.
Move slowly across the carpet
Move the mop slowly in straight passes and let the steam reach the carpet. Work from the far side of the room toward the door so you do not walk on the damp carpet. The PureSwirlz, GorFanty and Mxnsewr cords reach 23 ft, and the LABIGO cord is 4 meters long, so plug in where the cord covers the room.
Let it dry and clean the mop
Let the carpet dry before you walk on it. Wash the microfiber pads from the PureSwirlz and GorFanty after use. Unplug the mop before you clean it. The LABIGO stops with a 30-second beep when the tank runs dry, and the PureSwirlz beeps and shuts off when the water runs low.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
LABIGO Steam Cleaner 10-in-1 Detachable Handheld Steam Mop
Heats up in 10 seconds with 248°F steam, a 350 ml tank, 2 steam levels, a carpet glider and an auto shut-off that beeps when the tank runs dry.
View on Amazon -
PureSwirlz 10-in-1 Steam Mop with Detachable Handheld Steamer
Heats up in 12 seconds with 248°F steam, a 350 ml tank, 2 steam levels, a carpet glider, 2 washable microfiber pads and a 23 ft cord.
View on Amazon -
GorFanty Steam Mop - 10-in-1 MultiPurpose Handheld Steam
Heats up in 20 seconds with 3 steam modes, a 300 ml tank, a carpet glider, 2 washable microfiber pads and a 23 ft cord.
View on Amazon -
Mxnsewr Steam Mop 11-in-1 Handheld Detachable Adjustable Steam
Heats up in 20 seconds with 260°F steam, a 450 ml tank that gives up to 45 minutes of use, adjustable steam and a 23 ft cord.
View on Amazon
These come from our ranked list Best Steam Mop for Carpet, which compares them spec by spec.
FAQ
Do I need the carpet glider to steam carpet?
Yes, fit it first. The LABIGO, PureSwirlz and GorFanty mops each include a carpet glider, and the GorFanty glider only needs fitting when you clean carpet. The glider lets the mop head move across carpet pile.
How long does a tank of water last?
The LABIGO and PureSwirlz tanks give 12 to 15 minutes of continuous steam per fill, and the Mxnsewr tank gives up to 45 minutes. Refill with tap water when the steam stops.
Can I add cleaner to the water tank?
No, use tap water only. The LABIGO warns that chemical cleaners may clog the steam nozzle, and the Mxnsewr uses water only for cleaning. Follow the manual for your mop.
What steam setting should I use on carpet?
Start on the low setting. The LABIGO and PureSwirlz have 2 steam levels, with low for daily cleaning and delicate surfaces. The GorFanty has 3 modes, with level 1 for daily cleaning.




