Amazon Black Friday Week deals

Paid link

How-to · Steam Mops

How to Use a Steam Mop

Short answer

Fill the tank with water, plug the mop in, and wait for the steam to build. Push the mop slowly across a sealed hard floor and let the steam and pad do the work, then lift the pad off and let the floor dry. Check the maker's manual for which floors and pads your model allows.

  1. Fill the tank with water

    Lift the tank off the mop or open its fill cap, and fill it with water at the sink. Use water only in the tank, and do not add cleaners. Put the tank back, close the cap, and plug the mop in. On a model with a removable tank, you can lift it off and refill it at the sink between passes.

  2. Wait for the steam to build

    Switch the mop on and wait until it starts making steam. Heat-up times differ by model: the LABIGO heats up in 10 seconds, the Shark in 25 seconds, and the PurSteam and BISSELL models in 30 seconds. Choose a steam level if your model has one, using a low setting for a light pass and a higher one for stuck-on dirt.

  3. Mop slowly across the floor

    Push the mop in slow, overlapping passes across the floor. Let the pad rest on one patch at a time instead of rushing over it, and go back over spots that still show dirt. Keep the cord behind you as you work so it stays out of the mop's path.

  4. Detach the handheld steamer

    On a model with a detachable handheld unit, lift the steamer off the mop body to reach other surfaces. Fit the attachment for the job, such as a brush for grout or a nozzle for tight corners. Put the steamer back on the mop body when you finish, and store the attachments with the mop.

  5. Empty the tank and wash the pads

    Unplug the mop when you finish. Empty any water left in the tank, and take the pad off the mop head. Wash the pad as the maker's manual says and let it dry fully before you store it. Put the mop away with the cord wrapped loosely and the pad off, so it is ready for the next use.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Steam Mop, which compares them spec by spec.

FAQ

Can I use a steam mop on any floor?

No. Use it only on sealed hard floors, such as sealed hardwood, tile, and stone, and check the maker's manual for your floor type.

What do I put in the water tank?

Water only. Do not add cleaners, and use the maker's own descaler only if the manual allows it. Empty the tank after each use so standing water does not sit in the mop.

Why is my steam mop not making steam?

Check that the tank has water, the cap is closed, and the mop is plugged in and switched on. A cold mop may still be heating up, so wait until steam starts. If it still makes no steam, contact the maker or a repair service.

How do I clean the mop pads?

Take the pads off the mop head and wash them as the maker's manual says. Let them dry fully before you put them back on. Keep a spare set of pads so a clean one is ready when the other is in the wash.

More steam mops how-tos