How-to · Window Air Conditioners
How to Clean a Window AC Before Storage
To clean a window AC before storage, unplug it, run the fan to dry the inside, and take out the filter for a wash. Wipe the case and the coils, let the unit dry fully, and store it upright in a dry place with a cover on. A clean, dry unit comes out of storage ready for the next season.
Dry the inside with the fan
Run the fan mode for a while before you unplug the unit, so air moves across the coil and dries it. A dry inside stores better than a damp one. Once the inside feels dry, unplug the unit from the wall outlet. Do not store the unit while it is still wet inside.
Remove and wash the filter
Open the front panel as the maker's manual shows and slide the filter out. Rinse the filter with water and a little mild dish soap only if the manual allows washing it, then let it dry fully before it goes back in. A clean filter keeps dust out of the unit while it sits in storage. Put the dry filter back in place before you move the unit.
Wipe the case and coils
Wipe the outside of the case with a damp cloth and a little mild dish soap, then wipe it again with a cloth dampened with water alone. Vacuum dust off the front coil with a brush attachment, and wipe the fins in the direction they run. Use water only on the coils, or the maker's own cleaner if the manual allows it, and never mix cleaners.
Let the unit dry fully
Leave the unit unplugged with the front panel open until the inside feels dry to the touch. Water left inside the unit over storage can leave a damp smell, so wait until every part you can reach feels dry. Wipe any water you find in the drain area with a cloth. Do not cover the unit until it is dry.
Store it upright and covered
Store the unit upright in a dry place, out of the way of traffic. Put a cover over it to keep dust off, and leave the cover loose enough for air to move. Check on the unit now and then over storage, and wipe off any dust that gathers. When the season starts again, wash the filter and check the unit before you plug it in.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
GE Window Air Conditioner
Its washable, reusable slide-out filter lifts out for a rinse before storage, and its mechanical dials give 2 cooling modes and 2 fan speeds.
View on Amazon -
Frigidaire 6,000 BTU Window Air Conditioner
Its washable dust filter lifts out for a rinse before storage, and Clean Filter alerts tell you when it is time to clean it.
View on Amazon -
ROVSUN 8000 BTU Window Air Conditioner
Its washable filter is reached from the front panel for a rinse before storage, and it has 5 modes including cool, heat, dry and fan.
View on Amazon -
Amazon Renewed Midea 5,000 BTU 150 Sq ft Mechanical
Its 2 cooling modes and 2 fan speeds run from mechanical controls, and it fits windows 23 to 36 inches wide.
View on Amazon
These come from our ranked list Best Window AC Unit, which compares them spec by spec.
FAQ
Should I run the fan before I store the unit?
Yes. Run the fan mode for a while before you unplug the unit, so air moves across the coil and dries the inside. A dry inside stores better than a damp one.
Can I store the window AC on its side?
No. Store it upright in a dry place, out of the way of traffic. Put a cover over it to keep dust off, and leave the cover loose enough for air to move.
Do I need to wash the filter before storage?
Yes. Slide the filter out, rinse it with water and a little mild dish soap only if the manual allows washing it, and let it dry fully before it goes back in.





