Amazon Black Friday Week deals

Paid link

How-to · Window Air Conditioners

How to Clean a Window AC Fan

Short answer

To clean a window AC fan, unplug the unit, remove the filter and wash it with water and mild dish soap if the manual allows it, then wipe the front grille, louvers and the fan blades you can reach from the front. Let the filter and the parts dry fully before you refit them and plug the unit back in.

  1. Unplug the unit first

    Switch the unit off and unplug it from the wall before you touch the fan or the filter. Wait until the fan stops turning, then work with dry hands. Keep the plug away from water while you clean. If the cord or the plug looks damaged, leave the unit alone and contact the maker or a repair service.

  2. Remove and wash the filter

    Slide the filter out of the front panel and tap the dust off over a trash can. Wash it with water and mild dish soap if the manual allows it, then rinse it and let it dry fully before it goes back in. A filter that still looks grey after washing needs replacing with the maker's part. Never run the unit with the filter out.

  3. Wipe the grille and louvers

    Wipe the front grille and the louvers with a damp cloth and mild dish soap, then wipe them again with a clean damp cloth. Use a soft brush to lift dust from the slats and the edges where dust gathers. Work from the top down so dirt falls away from the parts you already wiped. Do not spray water into the unit.

  4. Clean the fan blades you can reach

    Look through the front grille to find the fan blades and wipe the ones you can reach with a damp cloth. Turn the blades by hand to reach the next one, and use a soft brush on dust that the cloth leaves behind. Wipe the blades until the cloth comes away clean. If the fan sits behind a panel you cannot open, or the blades will not turn, contact the maker or a repair service instead of forcing it.

  5. Dry the parts and refit them

    Let the filter, the grille and the fan blades dry fully before you refit them. Slide the filter back into its slot and check that it sits flat. Wipe the outside of the unit and the area around it, then plug the unit back in and switch it on. If the fan still makes a noise it did not make before, switch the unit off and contact the maker or a repair service.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Window AC Unit, which compares them spec by spec.

FAQ

Can I wash a window AC filter with water?

Only if the maker's manual says the filter is washable. If it is, wash it with water and mild dish soap, rinse it, and let it dry fully before you put it back.

How often should I clean the fan on a window AC?

Clean it when dust shows on the grille or the fan, or when the filter looks grey. Follow the schedule in the maker's manual.

What if the fan blades will not turn?

Do not force them. Switch the unit off, unplug it, and contact the maker or a repair service. Blades that will not turn can point to a fault inside the unit.

More window air conditioners how-tos