How-to · Window Air Conditioners
How to Clean Window AC Fins
To clean window AC fins, unplug the unit and remove the front panel and filter as the manual shows. Brush loose dust off the fins with a soft brush, then wash the filter with water and mild dish soap if the manual allows it. Straighten bent fins with a fin comb, rinse the fins lightly, and let the unit dry before you put it back together.
Unplug the unit and open it up
Unplug the unit before you touch anything inside it. Remove the front panel and slide out the filter as the maker's manual shows, and set the screws and the panel where they will not get lost. Read the manual for your model before you go further, since the panel and filter come off in different ways on different units.
Brush dust off the fins
Brush loose dust off the fins with a soft brush, working in the direction the fins run, from top to bottom. A vacuum with a brush attachment can pick up dust from the face of the coil. Press lightly and keep the brush flat, since the thin metal fins bend when pushed from the side.
Wash the filter and rinse the fins
Wash the filter with water and a little mild dish soap if the manual allows it, then rinse it and let it dry fully before it goes back in. For the fins, wipe them with a damp cloth or rinse them lightly if the manual allows it, and use the maker's own cleaner only if the manual allows it. Never mix cleaners, and never use bleach.
Straighten bent fins and put it back
Straighten any bent fins with a fin comb, sliding it gently along the fins until they sit straight again. Let the unit dry fully, then slide the filter back in and refit the front panel. Plug the unit back in and check that it runs as the manual describes, and follow the cleaning schedule in the manual from here on.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
GE Window Air Conditioner
A unit rated by the maker for up to 150 sq ft, with a washable slide-out filter and simple mechanical controls.
View on Amazon -
Frigidaire 6,000 BTU Window Air Conditioner
A unit rated by the maker for up to 250 sq ft, with a washable dust filter, a clean filter alert and a remote control.
View on Amazon -
ROVSUN 8000 BTU Window Air Conditioner
A unit rated by the maker for up to 350 sq ft, with a washable filter, phone app control and a remote control.
View on Amazon -
Amazon Renewed Midea 5,000 BTU 150 Sq ft Mechanical
A unit rated by the maker for up to 150 sq ft, with mechanical controls, 2 cooling modes and 2 fan speeds.
View on Amazon
These come from our ranked list Best Window AC Unit, which compares them spec by spec.
FAQ
How often should I clean the fins?
Clean them when dust is visible on the fins or the filter looks grey, and follow the schedule in the maker's manual. A unit that runs with a dirty filter and dusty fins works harder, so check both when you clean the filter.
Can I use a hose on the fins?
Only if the maker's manual allows it, and then only a light rinse or a gentle spray. Do not aim a strong stream at the fins, and keep water away from the controls.
What should I do if the fins are bent?
Straighten bent fins with a fin comb, working gently along the direction of the fins. Do not force fins that resist, and do not use a metal tool that can tear them. If many fins are bent or torn, contact the maker or a repair service.




