How-to · Window Air Conditioners
How to Use Coil Cleaner on a Window AC
To use coil cleaner on a window unit, unplug the unit, take out the filter and the front grille, spray the cleaner evenly on the coils, let it work, and rinse only if the unit manual allows it. Put the filter and grille back, plug the unit in, and run it as the manual directs.
Unplug the unit and remove the filter
Switch the unit off and pull the plug from the outlet before you touch the inside of the unit. Slide out the filter and set it aside, then remove the front grille as the manual shows. Put the screws or clips from the grille where you can find them again, since the grille has to go back in the same place.
Clear loose dust from the coils
Look at the coils behind the grille and brush or vacuum away the loose dust sitting on them. Work with a soft brush and a light touch, and keep the brush moving across the fins rather than pressing into them. This step keeps loose dust from turning into a paste when the cleaner goes on.
Spray the coil cleaner on the coils
Spray the cleaner evenly across the coils, starting at the top so the foam runs down over the rest of the coil. Keep the spray off the controls and the electrical parts inside the unit. Use only a cleaner the unit manual allows, and spray enough to coat the coils.
Let the cleaner work and rinse if allowed
Leave the cleaner on the coils until the foam has carried the loosened dirt down and out of the coil. Rinse the coils with water only if the unit manual allows it. Wipe up any cleaner or water that drips onto the floor or the window sill.
Put the unit back together and switch it on
Wash the filter with water and mild dish soap if the manual allows it, and let it dry fully before it goes back in. Slide the filter back into place and refit the front grille with its screws or clips. Plug the unit back in, switch it on, and check that air moves through the grille as it did before.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
GE Window Air Conditioner
Its washable, reusable slide-out filter makes cleaning easy, and its 5,000 BTU cooling is rated for up to 150 sq ft by the maker.
View on Amazon -
Frigidaire 6,000 BTU Window Air Conditioner
Its washable dust filter comes with Clean Filter alerts that tell you when to clean it, and it has a remote control, Eco mode and 3 fan speeds.
View on Amazon -
ROVSUN 8000 BTU Window Air Conditioner
Its 8,000 BTU cooling is rated for up to 350 sq ft by the maker, and its washable filter is reached from the front panel.
View on Amazon -
Amazon Renewed Midea 5,000 BTU 150 Sq ft Mechanical
Its 5,000 BTU cooling is rated for up to 150 sq ft by the maker, with 2 cooling modes, 2 fan speeds and 7 temperature settings.
View on Amazon
These come from our ranked list Best Window AC Unit, which compares them spec by spec.
FAQ
Do I need to remove the unit from the window to clean the coils?
No. You can reach the front coils with the unit in place once the grille is off. For the coils at the back of the unit, follow the manual, since reaching them can mean taking the unit out of the window.
Can I rinse the coils with water after spraying the cleaner?
Only if the unit manual allows it. Some manuals allow a light rinse, and some do not, so read the manual and the cleaner instructions first. If rinsing is not allowed, wipe away what drips out and let the coils dry before you switch the unit on.
How do I know the coils need cleaning?
A grey filter, dust you can see on the coils, and weaker airflow through the grille are signs to check the coils and the filter. When you see those signs, clean the filter and the coils as the manual directs.




