How-to · Steam Mops
How to Clean Wood Floors with a Steam Mop
Yes, you can clean sealed wood floors with a steam mop if the floor is sealed and the maker's manual allows it. Use the lowest steam setting, keep the mop moving so water does not pool, and let the floor dry before you walk on it. The four mops here heat up in 10, 20 or 30 seconds and run on water only.
Check the floor and the manual
Use a steam mop only on sealed hardwood floors, and check the maker's manual for your floor and your mop before you start. Sweep or vacuum the floor first so grit does not drag across the wood. If the floor is unsealed or the seal is worn, do not use steam on it.
Fill the tank with water
Fill the tank with water only and do not add chemicals. The Mxnsewr tank holds 450ml and gives up to 45 minutes of use, the ScrubWiz tank holds 320ml and gives up to 15 minutes, and the Schenley tank holds 15.2 fluid ounces with up to 37 minutes of steam time. The Bissell mop comes with a measuring cup for filling. A larger tank means fewer refills on a big floor.
Heat up and pick a steam level
Wait for the mop to heat up before you start: the ScrubWiz mop takes 10 seconds, the Mxnsewr mop takes 20 seconds, and the Bissell mop takes 30 seconds. Start on the lowest steam level. The Bissell mop has High and Low steam modes, the Schenley mop has 3 steam modes, and the Mxnsewr mop adjusts steam with a knob. Low steam puts less water on the floor.
Mop in slow, steady passes
Push the mop in slow passes and keep it moving so steam does not sit on one spot. The Schenley mop has a 180-degree swivel head that moves around furniture legs, and the Mxnsewr mop head turns 120 degrees left and right and 90 degrees front and back to reach corners. The Mxnsewr cord is 23 ft long, the Schenley cord is 16 ft, and the ScrubWiz cord is 13.12 ft, so plan where you plug in.
Empty the tank and wash the pads
When you finish, unplug the mop and let it cool before you clean it. Empty the water left in the tank. The ScrubWiz mop comes with two washable microfiber pads, the Bissell mop has washable microfiber pads, and the Schenley mop has washable microfiber pads that step off for washing. Let the pads dry fully before you store them. If the mop stops heating, unplug it and contact the maker or a repair service.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Mxnsewr Steam Mop 11-in-1 Handheld Detachable Adjustable Steam
An 11-in-1 detachable handheld mop with a 450ml tank, 20-second heat-up, 260°F steam and a 23 ft cord for hardwood floors.
View on Amazon -
ScrubWiz Steam Cleaner for Home
A 10-in-1 steam mop with a 320ml tank, 10-second heat-up, 248°F steam and two washable microfiber pads for sealed hardwood floors.
View on Amazon -
Bissell PowerFresh Deluxe 1806 Steam Mop
A steam mop with a 30-second warm-up, High and Low steam modes, a built-in SpotBoost brush and washable microfiber pads for sealed hardwood.
View on Amazon -
Schenley Steam Mop for Hard Floors
A 3 lb upright mop with 3 steam modes, 248°F steam, up to 37 minutes of steam time and a 16 ft cord for hardwood floors.
View on Amazon
These come from our ranked list Best Floor Steam Mop, which compares them spec by spec.
FAQ
Can I use a steam mop on unsealed wood floors?
No. The ScrubWiz and Bissell mops suit sealed hardwood floors, so use steam only where the floor is sealed and the maker's manual allows it. If the seal is worn or the manual does not allow steam, use another cleaning method.
How much water do I put in a steam mop?
Fill the tank with water only, using the measuring cup where one is included, as with the Bissell mop. The Mxnsewr tank holds 450ml, the ScrubWiz tank holds 320ml, and the Schenley tank holds 15.2 fluid ounces. Do not add chemicals unless the manual allows it.
How do I keep the floor from getting too wet?
Use the lowest steam setting and keep the mop moving so water does not pool on the floor. The Bissell mop has High and Low steam modes, the Schenley mop has 3 steam modes, and the Mxnsewr mop adjusts steam with a knob. Let the floor dry before you walk on it.



