How-to · Steam Mops
How to Steam Mop Hardwood Floors
To steam mop hardwood floors, check that the floor is sealed and approved for steam, sweep up loose dirt, fill the tank with water only, and mop in slow passes on a low steam setting. Let the floor dry before you walk on it, then empty the tank and let the mop cool before storage.
Check that the floor is sealed
Steam belongs on sealed hardwood only. The BISSELL mop is designed for sealed hard floors such as sealed hardwood, tile, granite and marble, and the CosyFame mop is made for sealed hard flooring approved for steam cleaning. If you are unsure whether your floor is sealed, check the flooring maker's guidance before you start, and skip steam on worn or unsealed boards.
Sweep up loose dirt first
Pick up grit before the steam comes out. Sweep or vacuum the floor so sand and crumbs are gone before the mop pad touches it. Loose dirt left on the floor can drag under the pad and mark the finish, so work through the room once with a broom or vacuum and empty the dust cup or bin before you mop.
Fill the tank with water only
Fill the tank with plain water and nothing else. The LABIGO mop warns that adding chemical cleaners may clog the steam nozzle, and steam mops are built to run on water. The BISSELL tank lifts off for a refill at the sink, and the CosyFame tank refills for longer sessions. Close the cap and wipe any drips off the outside of the tank.
Heat up and choose a steam level
Plug the mop in and wait for the steam to build. The LABIGO heats up in 10 seconds, the CosyFame in 20 seconds, and the BISSELL in 30 seconds. Start on the low setting for daily cleaning and delicate surfaces, and switch to the high setting for stuck-on messes. The BISSELL offers 3 steam settings, the LABIGO offers 2 levels, and the Schenley offers 3 steam modes.
Mop in slow, even passes
Push the mop in slow passes and let the steam do the work. The swivel heads on the LABIGO, CosyFame and Schenley mops turn around furniture legs and into corners, and the CosyFame and Schenley heads turn 180°. For a dried-on spot, flip down the BISSELL Easy Scrubber and work the spot until it lifts. Keep the mop moving so steam never pools in one place.
Empty the tank and store the mop
Unplug the mop before you clean it, then let it cool. Empty and rinse the water tank after use, wipe the mop with a soft, dry cloth, and let it dry fully before storage. Step on the Schenley washable microfiber pad to remove it, then wash and reuse it, and wash the BISSELL reusable microfiber pads the same way. The CosyFame mop stands on its own during breaks and in storage.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
LABIGO Steam Cleaner 10-in-1 Detachable Handheld Steam Mop
It heats up in 10 seconds, holds 350ml of water for up to 12 to 15 minutes per fill, and offers 2 steam levels with a detachable handheld unit.
View on Amazon -
BISSELL Steam Mop 1940A PowerFresh Floor Steam
It heats up in 30 seconds, offers 3 steam settings with a flip-down Easy Scrubber, and carries a 2-year warranty.
View on Amazon -
CosyFame Steam Cleaner Standable High Temperature Steam Mop
It heats up in 20 seconds, comes with 18 accessories, and runs on a 16.4 ft power cord with a 180° swivel head.
View on Amazon -
Schenley Steam Mop for Hard Floors
It weighs 3 lb, offers 3 steam modes with 248°F steam, and stands on its own with a 16 ft power cord.
View on Amazon
These come from our ranked list Best Steam Mop for Hardwood Floors, which compares them spec by spec.
FAQ
Can I steam mop unsealed hardwood floors?
No. Steam belongs on sealed hardwood only, so check that your floor is sealed and approved for steam cleaning before you start. The BISSELL mop is designed for sealed hard floors, and the CosyFame mop is made for sealed hard flooring approved for steam cleaning.
What do I put in a steam mop tank?
Plain water only. The LABIGO mop warns that adding chemical cleaners may clog the steam nozzle. Fill the tank with water, close the cap, and wipe any drips off the outside before you plug the mop in.
How long does a tank of water last?
The LABIGO tank holds 350ml and gives up to 12 to 15 minutes of continuous cleaning per fill. The Schenley mop gives up to 37 minutes of steam time. Refill at the sink when the tank runs dry.
Do I need to vacuum before steam mopping?
Yes. Sweep or vacuum first so sand and crumbs are gone before the mop pad touches the floor. Loose dirt left on the floor can drag under the pad and mark the finish.




