How-to · Steam Mops
How to Use a Steam Mop on Floors
To use a steam mop, fill the tank with water, plug the mop in, wait for it to heat up, then push it slowly across the floor. The steam loosens dirt as you move, and the pad picks it up. Work in sections, change the pad when it looks dirty, and let the floor dry before you walk on it.
Fill the tank with water
Fill the tank with water only, using the measuring cup where one is included. The Mxnsewr tank holds 450 ml, the ScrubWiz tank holds 320 ml, and the Bissell tank holds 12 oz. The Schenley tank holds 15.2 fluid ounces. Do not add floor cleaner or detergent to the tank, since these mops clean with steam from water alone.
Plug in and wait for steam
Plug the mop into an outlet and wait for it to heat up. The ScrubWiz heats up in 10 seconds, the Mxnsewr in 20 seconds, and the Bissell in 30 seconds. The Schenley has 3 steam modes, so pick the mode that fits the floor. Hold the mop still until steam comes through the pad, then start to move.
Push the mop across the floor
Push the mop slowly across the floor in straight lines, and let the steam do the work. Choose a steam mode to match the dirt: the Bissell mop offers high and low steam, and the Schenley mop offers 3 steam modes. The Mxnsewr mop head turns 120 degrees side to side and 90 degrees front to back, so it reaches under furniture and into corners, and the Schenley head swivels 180 degrees around furniture legs.
Change the pad and empty the tank
Change the microfiber pad when it looks dirty, and wash the pad so you can use it again. The ScrubWiz and Schenley mops include two washable microfiber pads each, and the Bissell mop has washable microfiber pads. When you finish, unplug the mop and let it cool before you empty the tank and put the mop away.
Detach the handheld steamer
The Mxnsewr, ScrubWiz and Bissell mops come apart into a handheld steamer. The Mxnsewr and ScrubWiz steamers clean tiles and windows, and the Bissell steamer cleans above the floor. The Mxnsewr has 11 accessories, and the ScrubWiz has 10 accessories, so fit the tool that suits the surface. Follow the manual when you change the tool, and let the steamer cool before you swap parts.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Mxnsewr Steam Mop 11-in-1 Handheld Detachable Adjustable Steam
An 11-in-1 steam mop with a 450 ml tank, 20 second heat-up, adjustable steam and 260 degree steam for hardwood, tile and laminate.
View on Amazon -
ScrubWiz Steam Cleaner for Home
A 10-in-1 steam mop with a 320 ml tank, 10 second heat-up, 248 degree steam and two washable microfiber pads.
View on Amazon -
Bissell PowerFresh Deluxe 1806 Steam Mop
A steam mop with high and low steam modes, a 30 second heat-up, a SpotBoost brush and washable microfiber pads.
View on Amazon -
Schenley Steam Mop for Hard Floors
A 3 lb steam mop with 3 steam modes, 248 degree steam, up to 37 minutes of steam and a 16 ft cord.
View on Amazon
These come from our ranked list Best Floor Steam Mop, which compares them spec by spec.
FAQ
Can I add floor cleaner to a steam mop?
No. These mops clean with steam from water alone, so fill the tank with water only. The Mxnsewr and ScrubWiz mops use no chemical detergents, and the Schenley mop uses pure steam. Check the manual for your model before you add anything to the tank.
How long does a steam mop run on one tank?
It depends on the tank. The Mxnsewr tank gives up to 45 minutes of use, the ScrubWiz tank gives up to 15 minutes, and the Schenley mop gives up to 37 minutes of steam. Refill the tank when the steam stops, following the manual for your model.
Which floors can I clean with a steam mop?
The ScrubWiz mop suits sealed hardwood floors and tiles, and the Schenley mop suits hardwood, laminate, tile and carpet. Check the manual for your floor type before you start.



