How-to · Steam Mops
How to Use a Steam Mop on Wood Floors
Use a steam mop on wood floors only when the floor is sealed, and keep the mop moving so steam never sits in one spot. Start on the lowest steam setting, test a hidden corner first, and let the floor dry before you walk on it. The mops below heat up in 10 to 30 seconds and clean with water turned to steam.
Check the floor is sealed first
Steam and water can get into bare wood, so only steam a floor with a sealed finish. If you are not sure the floor is sealed, put a few drops of water on a hidden corner: if the water beads, the seal is there, and if it soaks in, skip the steam mop. Follow the floor maker's care notes as well as the mop manual.
Sweep before you steam
Steam loosens dirt but does not pick up crumbs and dust, so sweep or vacuum the floor first. A dry mop pass picks up the loose dirt that steam would push around. Work in small sections and keep the mop moving in slow, even passes. Do not hold the mop still on one spot, since steam and heat build up where the mop sits.
Fill the tank and pick a steam level
Fill the tank with water only, and close it before you plug the mop in. The Mxnsewr tank holds 450ml and heats in 20 seconds, the ScrubWiz tank holds 320ml and heats in 10 seconds, and the Bissell mop is ready in 30 seconds with High and Low steam modes. The Schenley mop has 3 steam modes. Start on the lowest setting for wood floors, and turn the steam up only if the floor still looks dirty.
Let the floor dry and store the mop
When the floor looks clean, stop and let it dry before you walk on it. Unplug the mop before you change the pad or empty the tank. The ScrubWiz and Schenley pads are washable microfiber pads, so wash and dry them before the next use. The Mxnsewr mop stands on its own for storage, and the Schenley mop stands on its own too.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Mxnsewr Steam Mop 11-in-1 Handheld Detachable Adjustable Steam
An 11-in-1 steam mop with a detachable handheld steamer, a 450ml tank, 20-second heat-up and 260°F steam for hardwood floors.
View on Amazon -
ScrubWiz Steam Cleaner for Home
A 10-in-1 steam mop with a detachable handheld steamer, a 320ml tank, 10-second heat-up and 2 washable microfiber pads.
View on Amazon -
Bissell PowerFresh Deluxe 1806 Steam Mop
A steam mop with High and Low steam modes, a 30-second warm-up, a built-in SpotBoost brush and washable microfiber pads.
View on Amazon -
Schenley Steam Mop for Hard Floors
A 3 lb steam mop with 3 steam modes, 248°F steam, a 16 ft cord, a carpet glider and a 1-year warranty.
View on Amazon
These come from our ranked list Best Floor Steam Mop, which compares them spec by spec.
FAQ
Can I use a steam mop on unsealed wood floors?
No. Steam and water can get into bare wood and damage it. Only steam floors with a sealed finish, and test a hidden corner first if you are not sure.
How long does a steam mop take to heat up?
The ScrubWiz heats in 10 seconds, the Mxnsewr in 20 seconds and the Bissell in 30 seconds. Wait until steam starts before you mop.
Do I add cleaner to a steam mop?
No. These mops clean with water turned to steam, and the Mxnsewr and ScrubWiz use water with no added cleaner. Fill the tank with water only, and follow the manual if it names its own cleaner.




